How do you reset the oil light on a Toyota Corolla?
Table of Contents
How do you reset the oil light on a Toyota Corolla?
Press and hold the trip reset button near the odometer until “Trip A” appears on the central screen. Turn the key back to “Off.” While pressing the button to reset the trip, turn the key back to the “On” position. Keep holding the trip reset button until the miles section of the odometer flashes zero.
How do you turn off the maintenance required light on a 2010 Toyota Corolla?
Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor around 10 seconds. The maintenance light should begin to flash, and you may hear a beeping. Then the light should go out.
How do I reset my maintenance required?
How do I reset the “Maint Reqd” light?
- Turn ignition switch to the ON position.
- Set the Odometer/Trip Display to TRIP A mode.
- Turn the ignition switch to the OFF position.
- Depress and HOLD the Trip Meter RESET button while turning the ignition switch to the ON position.
- The Service Maintenance Reminder Light will.
What oil should I put in my 2010 Toyota Corolla?
Mobil 1 – Extended Performance High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart (Part No. 15020)
How do I turn off maint reqd?
How to reset maintenance light on Toyota Corolla?
Insert the keys in the Corolla.
How to reset maintenance light Toyota after an oil change?
Firstly,turn the ignition to ON without starting the car.
What type of brake fluid for Toyota Corolla?
“Spongy” brakes
What oil does a Toyota Corolla take?
To ensure that your Corolla is running smoothly, we recommend that you use Toyota Genuine Motor Oil with a grade of ILSAC GF-5, and a viscosity of SAE 0W-20. This oil is guaranteed to perform between temperatures of -20 degrees and 100 degrees Fahrenheit. What is the recommended oil for Toyota? 5W-30 Motor Oils.