How wide are XL sunglasses?
Table of Contents
How wide are XL sunglasses?
What is the biggest size for sunglasses?
| Sunglasses size | Lens width | Bridge width |
|---|---|---|
| S | < 45 mm | < 14 mm |
| M | 45 mm – 50 mm | 14 mm – 16 mm |
| L | 50 mm – 60 mm | 16 mm – 20 mm |
| XL | > 60 mm | > 20 mm |
What does 58 mm mean in sunglasses?
When the sunglass size is indicated as “58mm”, this refers to the width of one of the lenses in the sunglasses. Above you see an image and the size “58mm” is measurement “A”, or the width of one of the lenses at it’s widest point.
Can sunglasses be too wide?
1. The width of the frame should match the width of your face. This means, when looking at you straight on, the glasses should not hang off the side of your face (this would mean the frame is too wide) and we should not be able to see the sides of the temples (this would mean the frame is too narrow).
What is the standard size for Ray Ban Aviators?
58mm
The Aviator 58mm Eyesize is considered a “Standard” size by Ray-Ban. Typically, we see standard sizes when there are multiple sizing options. By labeling a specific size as “Standard,” this means that 90% of people select that size.
What is considered a wide face for glasses?
Widths between 4.5 and 5.5 inches fall in the medium category, and those whose temples measure greater than 5.5 inches apart should look for glasses for wide faces. Wide faces have soft, circular features, so glasses for wide faces often have strong, angular details, which offset the soft, round nature of the face.
How wide should my aviators be?
The bridge should sit comfortably, not too short or too wide. If it is too short, the bridge will sit too high on the face; if it is too wide, it will droop too low down the bridge of the nose. Your eyelashes should not be able to touch the lenses. Your aviators are too small if they sit that close to your eyes!
How do I know my Ray-Ban lens size?
Most of Ray-Ban glasses have the size measurement printed inside the temples. The third figures in the sequence are expressed in millimeters and correspond to the following measures : diameter lens (example “52”), bridge width (example “18”) and length of the temples (example “140”).
WHAT IS lens width on sunglasses?
LENSES. The width of the lens is the first number in (50-20-150). The front measurement includes the diameter of the lens and the width of the bridge measured in millimeters and usually separated by a small dash or rectangle (e.g.: 50 – 20).
How do I know my lens width?
Calculate your lens width using nose width and total width. Knowing the total width can also help you determine the proper lens width. Subtract 6 millimetres (0.24 in) and your bridge width from the total width and this will give you your lens width. Lenses typically range between 50–60 millimetres (2.0–2.4 in).
How can I make my sunglasses wider?
Heat the bridge of the sunglasses with a hairdryer. The bridge is the point where the glasses sit on your nose. Use a hairdryer on a hot setting in 30-45 second bursts to heat the bridge. This will help avoid damage to the frames. Check regularly to see how soft the frames have become.
How do you fix sunglasses that are too wide?
The Problem: Your glasses are too wide on your temples. The Fix: Secure the lens with your non-dominant hand and softly push in on the end piece with your dominant hand. Do this to both sides to tighten the fit of your glasses on your head.
