Is a pole saw safe?

Is a pole saw safe?

Pole saws are not dangerous if you follow all the necessary safety precautions and wear the correct protective clothing. The main things to avoid are kickback, falling branches and trying to cut branches at ground level.

What safety precautions should you observe if you use a ladder in pruning?

If a ladder is used for pruning, then basic rules for ladder safety should be followed such as: always set the ladder on a solid, level surface; stepladders should be fully opened with spreaders locked; never step above the top two rungs of a stepladder; never stand on a rung or step and face away from the ladder; and …

What are long handled pruners?

Loppers are essentially pruners with long handles. They’re used mostly to prune out twigs and smaller branches (up to 2 inches in diameter, depending on the lopper). The long handles allow you to reach higher/farther and give you the leverage you need to cut thicker branches.

What are the health and safety hazards associated with pruning?

falling objects • punctures and cuts from tree branches • allergic reactions to trees and poisonous plants, and • biting or stinging hazards including ants, bees, wasps and snakes.

What is a safety rule for climbing a ladder?

When climbing up or down, always: Face the stepladder. Keep your body centered between side rails. Maintain three-point contact by keeping two hands and one foot, or two feet and one hand on a ladder always. Keep a firm grip.

How big of a limb can I cut with a pole saw?

Pole saws are intended for use on limbs up to a couple of inches thick. The thicker the wood, the more dangerous, and the slower and more tiring it will be to cut.

What is another name for long handle pruner?

Pruning shears, also called hand pruners (in American English), or secateurs (in British English), are a type of scissors for use on plants.

What is the difference between loppers and shears?

Finally, pruning tools that are used in one hand are known as pruners (or hand shears) while large tools that require you to use both hands are known as loppers.

How do you transport pruning shears?

Try carrying them in a belt holster for easy access. Buy a holster that your pruners fit snugly into and with a hole at the bottom. This allows wood chips, dust, and debris to fall out instead of collecting in there, as it will tend to.

What are the methods of pruning?

Pruning Techniques

• Clean: Selective pruning to remove one or more of the following parts: dead, diseased, and/or broken branches.
• Thin: Selective pruning to reduce density of live branches.
• Raise: Selective pruning to provide vertical clearance.
• Reduce: Selective pruning to decrease height and/or spread.

What are the types of pruning shears?

There are three basic types of pruning shears: anvil, bypass, and ratchets. A bypass is the most popular of the three and acts like scissors. It is good for growing stems. Anvil pruners feature a straight blade that uses a splitting action.