What are the body dimensions of a Fender Telecaster?
Table of Contents
What are the body dimensions of a Fender Telecaster?
Overall length is 38 3/4 in. (98.4 cm.), 12 5/8 in. (32.1 cm.) wide at lower bout, and 1 3/4 in.
How thick should a guitar body be?
Top thickness targets for classic guitars are given as around . 100” (2.5 mm) for spruce and . 110” (2.8 mm) for softer wood such as cedar. For steel string guitar the recommendation is 1/8” (.
How thick is a Fender Strat body?
44.5mm/ 1.75” thick
Size Matters. The run of the mill 60’s Strat body is 461mm/ 18.1” Long and 323mm/ 12.7” wide. They are also 44.5mm/ 1.75” thick.
Do Thinline telecasters sound different?
Thinline Telecaster Sound The Thinline still recreates the classic chime and twang only now a slightly more hollow and rounder variation of the classic Tele sound. The Thinline also sounds wider with an additional boost of bottom end which is to be expected with a chambered guitar.
What wood is used for Telecaster bodies?
There are two types used to make guitar bodies—northern ash, and southern or “swamp” ash. The latter is more commonly used, and was chosen by Leo Fender for his first Esquire, Broadcaster and Telecaster guitars. Found mainly in the wetter environs of the U.S.
How thick is a Stratocaster body?
How thick is a Jazzmaster body?
Body thickness – 46mm. Finished to an exceptionally high standard in POLYURETHANE.
What are Thinline telecasters good for?
The Thinline Telecaster with a set of humbuckers includes a good balance of warmth and character which can be heard when playing chords that may appeal to all the rhythm players out there.
Who plays Thinline Tele?
Guitarists from Radiohead, Franz Ferdinand, Gomez, the Hives, Snow Patrol and many other bands were seen playing Telecaster Thinline, Custom and Deluxe models. Fender responded by reissuing a U.S.-built model—the ’90s Tele Thinline—from 1997 to 2000.
Is alder better than basswood?
Top 3 – Popular Alder Guitars Tonally, alder is similar to basswood, but brighter and with slightly less sustain. The mids of alder aren’t as pronounced as basswood, but there is more emphasis on the highs and a bit more breathing room for the lows.
How thick is a Gibson SG?
An SG is approximately 1 3/8″ Thick 1 1/4″ is way to thin to ensure adequete gluing surface for the neck tennon. Sometimes you will see SG copys at 1 1/2″.
