What bit is closest to 9 32?
Table of Contents
What bit is closest to 9 32?
Drill bit sizes are written as irreducible fractions. So, instead of 78/64 inch, or 1 14/64 inch, the size is noted as 1 7/32 inch….Decimal-fraction equivalents.
| fraction | in | mm |
|---|---|---|
| 17⁄64 | 0.265625 | 6.746875 |
| 9⁄32 | 0.28125 | 7.14375 |
| 19⁄64 | 0.296875 | 7.540625 |
| 5⁄16 | 0.3125 | 7.9375 |
What size is 32 drill bit?
Drill Bit Size Chart
| Size | Decimal Equivalent | Decimal Equivalent |
|---|---|---|
| .32 mm | 0.0126 | 1.1417 |
| 81 | 0.013 | 1.1562 |
| 80 | 0.0135 | 1.1614 |
| .35 mm | 0.0138 | 1.1719 |
What size is #9 drill bit?
Screw Machine Drill Bit: #9 Drill Bit Size, 44.50 mm Max Drilling Dp, 3/16 in Shank Dia.
What is equivalent to a 9/16 drill bit?
Jobber Length Drill Bit Chart
| Fractional Sizes | Decimal Equivalent (Inches) | Flute Length (Inches) |
|---|---|---|
| 9/16” | 0.5625 | 4-13/16” |
| 37/64” | 0.5781 | 4-13/16” |
| 19/32” | 0.5938 | 5-3/16” |
| 39/64” | 0.6094 | 5-3/16” |
What is the metric equivalent of 9 32?
SAE to Metric Conversion Chart
| SAE | Metric | Inch |
|---|---|---|
| 6.5mm | 0.256 | |
| 7mm | 0.276 | |
| 9/32″ | 0.281 | |
| 5/16″ | 0.313 |
How are drill bits sized?
Typical drill bits have markings somewhere on the shank above the threads. It’s small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.
What size drill bit do I use for a 8 32 tap?
| To Tap This Size Screw Or Bolt: | Use This Drill Bit: | Decimal Inches |
|---|---|---|
| 8-32 NC | #29 | .1360 |
| 8-36 NF | #29 | .1360 |
| 8-40 NS | #28 | .1405 |
| 3/16-24 NS | #26 | .1470 |
What is a number 9 drill?
Number Drill Sizes
| Drill | Inch | mm |
|---|---|---|
| 11 | 0.191 | 4.85 |
| 10 | 0.193 | 4.90 |
| 9 | 0.196 | 4.98 |
| 8 | 0.199 | 5.05 |
What size is a 1/4 drill bit?
| Drill Bit Hole Diameters | ||
|---|---|---|
| Metric Size | Fractional Size | |
| 6 mm | .2362 | 15/64 |
| 7 mm | .2756 | 1/4 |
| 8 mm | .3150 | 17/64 |
Is 7mm and 9/32 the same?
7mm = almost 9/32 inch (= a bit over 1/4 inch) 8mm = 5/16 inch. 9mm = almost 3/8 inch. 10mm = just over 3/8 inch.
What is 9 32 to a millimeter?
What do the numbers on a drill bit mean?
As mentioned at the beginning of the article, the numbers on a drill represent the amount of torque the tool can apply to an object (such as a screw) or for hole drilling. The numbers usually range from 1 to 20 (or more) with 1 representing the least amount of torque and 20, the greatest.
How do you measure a drill?
Tap-drill diameter equals nominal diameter minus thread pitch. For example, drill size for a 3/8-16 thread is 0.375 0.0625 (pitch) = 0.312 in. in diameter, and for a 10-32 thread, the drill diameter is 0.190 0.032 = 0.159 in. (a #21 drill).
What is the drill size for a 10-32 tap?
| To Tap This Size Screw Or Bolt: | Use This Drill Bit: | (Closest Fractional:) |
|---|---|---|
| 10-32 NF | #21 | 5/32″ |
| 5mm-0.90mm | 4.2mm | – |
| 5mm-0.80mm | 4.3mm | – |
| 12-24 NC | #16 | 11/64″ |
What do numbers mean on drill bits?
