Blog

What is an EHS headset?

What is an EHS headset?

An Electronic Hook Switch (EHS) is a cable solution that connects a wireless headset base and a desk phone. An EHS enables call control functionality directly on the headset, eliminating the need for a mechanical handset lifter.

How do I use my Panasonic phone headset?

Plug in your headset via the 2.5mm headset jack on the side of the phone, then follow these simple steps:

  1. Press the Program Button.
  2. Hit 6 & 1 on keypad. Screen should show Headset Mode.
  3. Press Auto Dial / Store Button.
  4. Press up arrow till screen shows “Headset On”
  5. Press Auto Dial / Store Button.
  6. Press the Program Button.

How do I connect to APC 43?

Press the Settings button on the phone (the checkbox icon). Select “Device Configuration” > “Media Configuration.”…If the phone is equipped with a 7914, 7915, or 7916 expansion module:

  1. Plug the expansion module into the telephone AUX port.
  2. Plug the APC-4/APC-40/APC-41/APC-42/APC-43 into the expansion module.

What does an EHS adapter do?

Electronic Hookswitch (EHS) adapters provide a ring alert signal to your headset anytime your deskphone rings. It also allows you to answer and end calls right from your headset anywhere within your headset’s range. EHS adapters eliminate the need for an HL10 handset lifter.

What is poly EHS?

Electronic Hook Switch Cables (EHS) provide remote desk phone call control (answer/end) with your Plantronics wireless headset system (or the MDA200 headset hub). We offer cables that are compatible with many of the most popular office desk phones.

How do I connect my headset to my cordless phone?

1) Landline phone WITH 2.5mm port:

  1. Connect the extension cord to your landline phone.
  2. Plug in your AC power adapter to the wall, then connect the other end into your wireless phone headset charging base.
  3. Included with your wireless phone headset is an RJ9 cord.
  4. Your headset is setup and ready to be used!

How do I connect my Plantronics CS540 to my Cisco phone?

How to Install Plantronics Wireless Headsets with Cisco Phones

  1. Install the handset of the phone into the Plantronics Telephone Interface Cable.
  2. Install the headset base unit into the handset port of the phone. Leave the “headset port” empty.
  3. Answer/End calls by pressing the call control button on the headset.

How do you use Plantronics wireless headphones?

To pair your BackBeat FIT to your phone:

  1. Starting with your headset powered off, press and hold the power button until the LED flashes red and blue.
  2. Activate Bluetooth on your phone and set it to discover new devices. To do so:
  3. Tap PLT_BBT to complete the pairing.

What is Hookswitch mode on a Polycom phone?

Electronic Hookswitch (EHS) allows you to start and end calls by pressing the appropriate buttons on the headset. Not all headsets support EHS; supported headsets must be connected to an EHS cable or adapter to use this feature.

Can I connect my Plantronics headset to my computer?

Plug the Bluetooth USB adapter into the computer. Once the devices pair successfully, the light on the headset stops flashing and is ready for use with the Voyager B230 UC headset.

Is Plantronics CS540 compatible with Cisco phones?

The Plantronics CS540-CIS is compatible with all Cisco IP phones.

  • August 12, 2022

You may also like...