What is ProtectaClear?
Table of Contents
What is ProtectaClear?
ProtectaClear has an impermeable finish that provides outstanding protection against damage caused by corrosion, salt water, salt air, acid rain, pollution, mildew, bird droppings, bleach, etc. ProtectaClear also reduces maintenance and cleaning.
How do you apply ProtectaClear?
- Make sure that there is good ventilation in your work area.
- Pour enough Everbrite™, ProtectaClear® or CrobialCoat™ into clean, dry container to be able to completely wet your applicator.
- Dip the applicator completely into the Coating in the application pan.
- Apply in smooth, even strokes.
How do I remove ProtectaClear?
To remove the coating: Soak a clean cloth or paper towel in recommended solvent. Using light pressure, move the wet cloth across the surface allowing the solvent to dwell and “melt” the coating. Wipe the “melted” coating up and off of the surface. Repeat the process until the coating is removed.
What is the best coating for copper?
Everbrite™ is the best coating for copper outdoors. It is a thicker coating with UV filters to protect the copper in harsh conditions. Use Everbrite™ for Copper Roofs, Building Cladding, Spouting and Downpipes, Weather Vanes, Capping, Fittings and Outdoor Sculptures.
How long does ProtectaClear take to dry?
The coating will be delicate until it is fully cured, which can take up to two weeks. You can shorten cure time by gently heating the coating AFTER it is dry to the touch. Dry, coated items placed in a low temperature oven (140°F -180°F) for 1 hour will be cured when cooled.
How do you use ProtectaClear on jewelry?
ProtectaClear® is practically invisible once applied, dry quickly and will seal and protect jewelry from tarnish, oxidation, and corrosion. ProtectaClear® can be applied on jewelry by spraying, brushing or by dipping. Application method is up to you, as the product is so easy to use!
How do you keep metal shiny?
To polish up un-lacquered copper and brass, cut a lemon in half, sprinkle coarse salt onto the cut side and rub the metal, then rinse and dry. Or rub on a paste made of three tablespoons of white vinegar and one tablespoon of baking soda, wipe with a damp cloth then buff.
Can you sand ProtectaClear?
To re- coat an aging ProtectaClear® coated surface, clean thoroughly with soap and water, rinse thoroughly, allow to dry completely and re-apply. ProtectaClear™ is self- adhering. No priming or sanding is necessary.
How can you stop copper from rusting?
Paint Sealer A quick and easy way to prevent copper from tarnishing is to spray or paint it with a special type of sealer. This sealer is usually readily available in the market and do a very good job of keeping an airtight seal on copper pieces.
How do you make copper stay shiny?
Mix white vinegar or lemon juice, table salt, and corn meal into a paste. The corn meal is a binder that makes the mixture more easily spreadable on the brass or copper. Whereas, the acidic white vinegar or lemon juice combined with the table salt are the active agents to break down the oxidation.
Can you use ProtectaClear on jewelry?
ProtectaClear® is practically invisible once applied, dry quickly and will seal and protect jewelry from tarnish, oxidation, and corrosion. ProtectaClear® can be applied on jewelry by spraying, brushing or by dipping.
How do you use everbrite on copper?
Many Types of Copper Can Be Protected Everbrite Coating, ProtectaClear and CrobialCoat are coatings that are easy to apply. After the copper is cleaned, neutralized and the polish residue is removed, simply wipe the coating on with the applicator that comes with every order of liquid coating.
How long does it take for ProtectaClear to dry?
4-5 days
Under normal circumstances & with good ventilation, the coating will be cured after 4-5 days. The coating MUST be cured before allowing water to dwell on the coated surface, immersing in water or filling fountains, etc.
Can you seal copper sink?
Copper kitchen sinks can be a real challenge. ProtectaClear will seal and protect copper from fingerprints, water stains, and tarnish. ProtectaClear is tough and durable, food safe once cured and will protect the metal from spots and discoloration. Clean and Polish the sink to the desired finish.
