What is the correct tyre pressure for my bike?
Table of Contents
What is the correct tyre pressure for my bike?
Pump it up. Proper tire pressure lets your bike roll quickly, ride smoothly, and avoid flats. Narrow tires need more air pressure than wide ones: Road tires typically require 80 to 130 psi (pounds per square inch); mountain bike tires, 25 to 35 psi; and hybrid tires, 40 to 70 psi.
Which tyre is best for KTM Duke?
Rear KTM Duke and KTM RC Tyres
| Tyre Name | Size | Speed Rating |
|---|---|---|
| CEAT Rad X1 | 150/60 R17 | H |
| MRF Revz C1 | 150/60 R17 | S |
| Metzeler Sportec Street | 150/60 R17 | H |
| Metzeler M5 | 150/60 R17 | H |
What is the tyre pressure on a KTM Duke 125?
29-32psi
Tyre Pressure for KTM Duke 125 (29-32psi), Tyre Air Pressure.
What is the tyre pressure for Duke 390?
What is the back tyre Air pressure – Duke 390? It’s clearly mentioned in the owners manual. The 2013 Repair manual says 29psi (2.0bar) front & rear for solo riding, 29psi (2.0bar) front & 32psi (2.2bar) rear if two-up.
What is the TYRE size of KTM?
The tyre size of KTM 200 Duke is 110/70-17….Dimensions Specifications of KTM 200 Duke.
| Seat height : | 810 mm |
|---|---|
| Width : | 730 mm |
| Height : | 810 mm |
| Length : | 2050 mm |
| Dry Weight : | 150.3 kg |
What is the TYRE pressure for a Nissan Juke?
2.1bar
This tyre placard recommends a minimum tyre pressure of 30psi for the Nissan Juke. This is equal to 210kPa and 2.1bar.
What is the tyre pressure for Duke 200?
The tyre pressure of KTM Duke 200cc is 25 psi in front and back when riding alone and 28 psi in front and 32 psi at rear when riding along with the pillion.
What is the tyre pressure for a Nissan Juke?
Which TYRE is used in Duke 200?
The tyre size of KTM 200 Duke is 110/70-17.
What is fuel range in Duke 200?
The fuel tank holds just over 3.5 gallons, you can go over 200 miles between fill-ups.
How do I know which tire pressure is low?
Push your hand down onto the tire. If the tire feels soft and squishy, the tire pressure is low. If the tire feels rock hard, meaning you are unable to push down on the tire at all, then it is overinflated. If the tire feels too low, pump some air into it while keeping your hand on it.
What should rear tyre pressure be?
Your tyre pressure should be a numerical value, measured in pounds per square inch (PSI) or BAR pressure. Most passenger cars have a recommended PSI between 31 and 35 when the tyres are cold.
What should be the tyre pressure in Duke 250?
The bike also has a front calliper of 4 pistons while the rear is a single-piston. The tyres offer excellent support to handle the heavy body of the bike and enable swift driving. The required tyre pressure for KTM Adventure 250 ranges from 29 to 32 psi, depending on how the terrain for driving is.
