What is the width of a Telecaster neck?

What is the width of a Telecaster neck?

56 mm (2-3/16″) – Width. 76 mm (3″) – Length.

Do telecasters have wide necks?

Fender Telecasters Like the Stratocasters, Telecasters on the high end have a wider neck around 1.68 inches, but stay near 1.65 on the cheaper end.

How thick is a Telecaster neck at the heel?

The fretboard is usually radiused so it’s thinner on the outside edges, but at its thickest point it’s 1/4″ (~6.4mm) thick. So to sum that up, neck-shaft (3/4″) + fretboard (1/4″) = 1.0″ (~25.4mm) overall neck heel thickness.

What is the width of a Telecaster?

Overall length is 38 3/4 in. (98.4 cm.), 12 5/8 in. (32.1 cm.) wide at lower bout, and 1 3/4 in.

What neck shape do telecasters have?

U-Shaped Neck Profile Especially deep U-shaped necks, like those found on some Telecaster guitars, are sometimes referred to as “baseball bat” necks. They’re good for players with large hands, and players who are more comfortable with their thumb on the back or side of the neck.

What is the width of a Fender Telecaster?

Are Telecaster necks thinner than Stratocaster?

Telecaster Necks. Both the modern Telecaster and Stratocaster bolt-on necks largely feature 22 frets and a 25.5” scale, with identical nut width and 9.5” fretboard radius. But the Stratocaster has a noticeably larger headstock, whether the original iteration or the bulky one that was used from 1965-81.

How wide is a Les Paul neck?

The neck width at the nut of a typical Les Paul is 1.695 inches (43mm).

How thick are guitar necks?

The depth, or thickness of your guitar’s neck, is the distance from front to back. For example, classic Fenders from the 1950s (such as the Strat) tend to be 0.870 inches thick at the first fret and 0.980 inches at the 12th fret. In the 1960s, these measurements decreased slightly to 0.820 inches and 0.960 inches.

Will a Stratocaster neck fit on a Telecaster?

Most guitar bodies and necks employ the Stratocaster shape, which is rounded at the end. However, bodies and necks from the Telecaster family use a heel that is squared. It’s always best to match these shapes correctly. In a pinch, a Strat neck will fit and intonate in a Tele-shaped pocket, but the reverse is not true.

When did Fender switch to 9.5 radius?

1980s
Today, most Fender electric instruments use one of two main fingerboard radius measurements. Most prevalent is the modern 9.5” radius (241mm), which was adopted in the 1980s and is now found on about two thirds of Fender electric instruments.

What is the nut width on a Telecaster?

1.65″ (41.91mm) This size is popular with most vintage 50’s and 60’s Fender necks. If you are looking for an accurate nut width for vintage styles, this is the correct choice.