What kind of paper does the star TSP100III use?
Table of Contents
What kind of paper does the star TSP100III use?
Thermal Receipt Paper
What size paper does the Star TSP143III & other Star TSP100III series printers take? A. The standard Star TSP100 paper size is 3 1/8″ x 230′. Buy 3 1/8″ x 230′ Thermal Receipt Paper (50 Rolls) here.
What paper does a star SP700 take?
STAR MICRONICS SP700 (All) 1-Ply 3 inch x 165′ Paper 50 Rolls.
How do I reset my star tsp 100?
Hold the Feed button until the Ready and Error lights start to blink blue and red.
- Release the Feed button.
- Close the paper hatch.
- The ready light should be blue.
- Turn the printer off and back on.
- The printer is now reset and in DHCP mode.
What kind of paper does a star to printer use?
Star Micronics has three main lines of printers. The TSP series printers use thermal paper with no ink ribbon in the machine and the SP series uses a bond paper and ink ribbons. The sleek mCollection is a relatively new line, and also uses thermal paper with no ink ribbons.
What size paper does Star printer use?
3 1/8″ x 273′
Star TSP100 Printer Paper Rolls – 3 1/8″ x 273′ Thermal Receipt Rolls, 50-Pack.
How do you open a Star cash drawer?
Click the Device Settings tab. Under Peripheral Unit Type, select Cash Drawer from the list: Under Peripheral Unit 1, select Document Top from the list: Click OK to complete the process.
How do you unlock a cash drawer without a key?
On the bottom of the drawer unit, at the back, in the middle, there is a small rectangular hole (about 1/2 by 3/4 inch). Insert a finger, then push the thin pin/tab toward the left side of the cash drawer (as viewed from the front). The catch will release and the drawer should slide open.
How do I reset my printer receipt?
How to reset your receipt printer
- Unplug the power cable from the back of the receipt printer.
- Press and hold the Feed button on the front of the printer.
- While holding the Feed button, plug the power cable back into the back of the receipt printer.
- Release the Feed button once the diagnostic page has finished printing.
How do I reset my Star receipt printer?
