Can you put a dimmer on a double pole switch?
Table of Contents
Can you put a dimmer on a double pole switch?
Things You’ll Need It is called a dimmer switch because it is often used in lighting circuits to allow the lights to be set to different levels of brightness. Only use 240-volt rated lights and switches when installing a double pole dimmer switch.
Can you put a dimmer on 2 wire?
Bulb Compatibility Only connect incandescent bulbs to Dimmer Switch (2-Wire). Dimmer Switch (2-Wire) is able to avoid need of a neutral wire by completing an electrical circuit through the connected load. Bulbs that include a power supply like LED and CFL bulbs may emit a soft glow even when the switch is turned off.
Can a dimmer be 2 way?
Two way dimming allows you to dim a light fixture from two locations. You can’t use ordinary rotary dimmer switches to do this because you could potentially dim the light down to 10% with one dimmer, then walk over to the other dimmer and attempt to dim the light to below 0%.
What is a 2 wire dimmer?
A 2-wire dimmer is usually installed during renovation projects in homes that were built before 1991. These types of house are usually fitted with flush-mounting boxes with only 2 electric wires: the phase conductor from the grid and the switching wire to the lamp, luminaire or light fitting.
What does L1 L2 and C mean on a dimmer switch?
The wires from your old switch can be connected either way round to the “C” and “L1” terminals of the dimmerswitch. If you are using a push-on/push-off dimmerswitch there is a spare terminal (L2) that you will not need to use for a 1-way circuit.
Why does my dimmer switch have 2 black wires?
The two black wires connecting to the black leading to the switch are supplying power to the switch/dimmer. The blue wire from the switch connected to the other black wire is the switched-hot going to the light. The green wire is the ground.
Why is there 2 black wires on dimmer switch?
STEP 3: Identify the terminal and ground wires. Observe the layout of the wires. You should see two black wires, each connecting to a different screw on the side of the switch. These are called terminal screws. You will also see two white (neutral) wires that connect to one another in the box.