How do I reset my Brother HL 1201 printer?
Table of Contents
How do I reset my Brother HL 1201 printer?
How to reset Drum Unit on BROTHER HL-1201?
- BROTHER HL-1201 must be power on.
- Open top cover.
- Now press Power Button 4 times.
- Close top cover.
- Very nice! BROTHER HL-1201 drum counter is reset and you can continue printing without errors.
How do I reset my Brother HL 1210W printer?
When a new TN1070 toner is installed in a Brother HL-1110 or HL-1210W printer, a reset gear turns and triggers a switch to reset the toner counter….Brother Toner Reset – HL1110 and HL1210W
- Press the power button 7 times to enter continue mode.
- Done.
- If you want to exit continue mode press the power button 7 times.
How do I clean my Brother HL 1110 printer?
Wipe the surface of the drum gently with a dry cotton swab until the dust of glue on the surface comes off. Put the toner cartridge back into the drum unit until you hear it lock into place. If you put the cartridge in correctly, the lock lever on the drum unit will lift automatically.
How do I change the wifi password on a Brother HL 1210w?
To change the password:
- Start your web browser.
- In the Login field, type the default login password.
- Click the Administrator tab.
- In the Enter New Password field, type the password you want to use.
- In the Confirm New Password field, retype the new password.
- Click Submit.
What is a corona wire?
A charged wire in a laser printer that draws the toner off the drum onto the paper. It must be cleaned when the toner cartridge is replaced.
How do I connect my Brother HL 1212w printer to my WiFi?
Press the WPS or AOSS™ button on your wireless access point/router. Press and hold the WiFi button on your machine for about two seconds. The machine starts the one-push wireless setting mode. The machine will search for a WLAN access point/router that supports Wi-Fi Protected Setup or AOSS™ for two minutes.
Why is my printer leaving black?
Black lines and smudges on printed output can be due to dirty printers. The accumulation of dirt, dust, or toner on a printer’s rollers or transfer belt can leave tracks on the page when the paper moves through the printer. Dirt on the rollers can also smudge toner on the printed output.
