What does IEC power cord mean?

What does IEC power cord mean?

International Electrotechnical Commission (IEC)
An IEC connector refers to a type of electronic cable that meet the International Electrotechnical Commission (IEC) standards.

Are IEC cables the same?

TECH TIPS – IEC CONNECTOR & CABLE GUIDE There are 12 IEC connectors by shape; each has a different name for the Male or Female side. For example C7 is male and C8 is female, but both have the same shape connector. Below you can find a list of the IEC connectors we supply, and a diagram of each.

What is a hospital grade power cord?

Hospital Grade Power Cords Medical grade power cords are specifically manufactured to meet the safe and reliable performance demands necessary for hospitals, clinics, and other medical facilities. Hospital grade power cables are subject to special requirements by Underwriters Laboratories (UL) and CAN/CSA C22.

Are IEC power cables interchangeable?

There are different kinds, and they are often interchangeable but not always. 1. They have different current ratings and different wire size. Make sure it is rated for something higher than the AC fuse rating in the gear.

Can you use extension cords in hospitals?

It is now possible for clinics, hospitals, long-term care facilities and other health care entities to extend the length of existing hospital-grade power cords using hospital-grade extension cords, when used correctly within specifications of the code.

What do the numbers on a power cord mean?

They refer to the number and types of wire inside the cable. For example, 14-2 means the cable has two 14-gauge wires inside. 12-3 G means the cable has three 12-gauge wires plus a bare ground wire.

What is the standard power cord?

North American: NEMA 5-15P (Type B) Among the NEMA 5-15P plug are the most widely used in sockets. They are three-wire circuits (hot, neutral and ground), and are rated at 15 A at 250 V, although they usually carry 110 V. NEMA 5-15P to NEMA 5-15R power cord is the most common type.

Can I use any power cord for my PC?

Basically, if it’s just a cable (no power adapter) and it physically fits your computer, it’ll be just fine. Desktop computers (and many monitors) all use the same connector (IEC). Of course, different plugs are used in different countries, but electrically they are all the same.

What happens if you mix power supply cables?

This is a public service announcement (PSA) – Never mix modular or semi-modular PSU cables between power supplies. Mixing Modular PSU Cables Can Kill Hard Drives or connected SSDs. Power components of a PC only with the modular cables bundled with a power supply. The side that plugs into the devices is standardized.

What is a hospital cord?

Hospital grade cords and cord sets have solid pins, larger plug bodies which virtually eliminate the risk of wire to outer contour shock, and withstand greater pull forces. Hospital grade cord plugs must carry the “green dot” signifying that they have been designed and tested to UL 817 and CAN/CSA C22.

How long can an extension cord be used in a facility?

General rule– if equipment is powered from an extension cord for more than 30 days, permanent solutions should be installed. OSHA regulations do permit decorative lighting and similar low voltage set-ups to be used for specific and temporary purposes for a period not to exceed 90 days.

Is there a difference in power cords?

The connector adheres to the electrical device while the plug attaches to the power supply or electrical receptacle. The frequency and voltage vary across different countries. Hence, you need to match your AC power cord with the country’s standard to ensure compatibility.