What is a Category 0 three-point hitch?
Table of Contents
What is a Category 0 three-point hitch?
Category 0 We define the smallest category by upper and lower link pins measuring 5/8 inches in diameter. The spacing between the two lift arms is approximately 20 inches. You find category 0 hitches on light-duty garden tractors with 20 horsepower or less.
What are the different 3-point hitch categories?
Size categories
| Category | Tractor power | Lower hitch spacing |
|---|---|---|
| 0 | Up to 20 hp (15 kW) | 20 in (510 mm) |
| 1 | 20 to 45 hp (15 to 34 kW) | 28 in (710 mm) |
| 2 | 40 to 100 hp (30 to 75 kW) | 34 in (860 mm) |
| 3 | 80 to 225 hp (60 to 168 kW) | 40 in (1,000 mm) |
What is the difference between Category 0 and Category 1 3-point hitch?
Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.
What is the difference between cat1 and Cat 2 three-point hitch?
Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable. Make sure you take a test drive with every tractor you’re considering.
What is a tractor drawbar used for?
Tractor drawbars are designed at the correct height from the ground to keep the pull forces below the center of gravity. Only use the drawbar to tow a load. A swinging or floating drawbar permits adjustment of the center line of pull to be maintained even on a hillside.
What is a 3 point hitch on a tractor?
Three-point hitches are made up of three movable arms. The two lower arms (the hitch lifting arms) are controlled by the hydraulic system. They provide lifting, lowering, and even tilting to the arms. The upper center arm (the top link) can be moved, but it is not usually powered by the tractor’s hydraulic system.
What is limited 3-point hitch?
Limited Category 1 3-Point Hitch This indicates that the hitch is lower to the ground and may not lift as high or open as wide as standard full-size category 1 hitches.
What size are Cat 0 pins?
Category 0 Top Link Pin 4-7/16″ This pin has a hole at the end that is 9/32 inches in diameter. It has a usable length of 3 inches and an overall length measuring 4-7/16 inches. The stable top link pin has a diameter measuring 5/8 inches.
What is the difference between Category 0 and Category 1 3 point hitch?
How do I know what category my 3 point hitch is?
The easiest way to differentiate the categories is by the lift arm pin diameter, which ranges from 5/8 in (16 mm) to 2 in (51 mm).
What is a heavy-duty category O hitch?
Heavy-duty Category?O? 3-point hitch for use on ATVs and UTVs , fits any automotive style 2″ receiver hitch Heavy-duty, 12v electric actuator that does the heavy lifting work for you while also providing an incredible 300 lbs of downforce, 250 lbs. lift capacity at the tool bar
How do I know what category my tractor hitch is?
What you’re looking for is your tractor’s lower hitch points (see the diagram on the right). There are 2 spots to measure to check which category your hitch is. Now follow our guide below to match your measurements to the hitch that fits your tractor.
Do I need a loader or a 3-point hitch?
For most jobs, you’ll need a loader or a 3-point hitch and some implements. To use those implements, you’ll need to know the difference between the 3-point hitch categories. What are the 3-point hitch categories?
