When should you use multiband compression?
Table of Contents
When should you use multiband compression?
Multiband compression works great at tightening low frequencies, reducing boom, and adding power. Treating the low-end with a dedicated band also allows you to apply heavy compression without affecting the midrange frequencies, which carry the attack of the sound.
How do you use multiband compression for mastering?
Add a multiband to your mix buss (or master fader). Start by setting a single band to somewhere around 0-100Hz and bypass the rest. Adjust the threshold and ratio until around 5dB of compression is applied on most notes or drum hits.
How do you adjust a multiband compressor?
Multiband Compressor Settings
- Threshold: Low for controlling dynamics and high for taming frequencies.
- Ratio: Low.
- Attack: Try somewhere around 20 ms.
- Release: Try somewhere around 100 ms.
- Gain: Level match for evenness as in the first approach, or turn it down to control harsh frequencies as in the second approach.
Is multiband compression the same as Dynamic EQ?
Dynamic EQs tend to allow for extremely narrow bandwidth settings, while multiband compressors do not. Dynamic EQs are great for surgical forms of processing. Dealing with sharp resonant frequencies in your audio signal is something that a dynamic EQ is well suited for.
What does a Multipressor do?
Multipressor (an abbreviation for multiband compressor) is a versatile audio mastering tool. It splits the incoming signal into different frequency bands—up to four—and enables independent compression of each band. After compression is applied, the bands are combined into a single output signal.
What is the purpose of a multiband compressor?
A multiband compressor allows you to split a track into different frequency ranges (called “bands”) and compress them independently. You can choose to compress only a certain part of a track’s frequency spectrum, or apply different flavors of compression to several areas of the spectrum.
How much compression do you need for mastering?
Here are some general guidelines if you want to use compression while mastering: Start your ratio at 1.25:1 or 1.5:1. Going past a ratio of more than 2:1 is not recommended. Set your threshold pretty high so that you’re getting 2 dB of gain reduction at most.
Should I compress while mastering?
Like equalization and limiting, compression is an important part of mastering. It’s a great way to add punch to your mix as well as a sense of overall control.
Whats the difference between Dynamic EQ and multiband compression?
Multiband compressors and dynamic EQs each have their pros and cons. If you’re going for transparent results, using a dynamic EQ won’t disappoint. If you need to compress just a specific frequency range of your track, a multiband compressor will give you what you need, at the expense of adding some color to the sound.
