How do I format a hard drive in Windows 98?

How do I format a hard drive in Windows 98?

To format your PC and reinstall windows 98 you need to do the following:

1. Make sure that you have the start up disk that came along with your operating system CD.
2. Eject the floppy disk after the start up disk has been created.
3. Turn off your computer.
4. Insert the start up disk in your floppy drive.
5. Restart your computer.

How do I restore my computer to factory settings Windows 98?

Windows 98

1. While pressing and holding Ctrl , restart your computer.
2. At the command prompt, enter scanreg /restore .
3. Click a registry entry that has the word “Started” next to the date, and then press Enter .
4. Press Enter again to restart your computer.

How do I format a Windows 95 hard drive?

Then follow these instructions:

1. Switch the Current Fixed Disk to 2. This is very important.
2. Display the current partition information.
3. Create a Primary DOS partition.
4. Exit FDISK by pressing the Esc key.
5. Reboot the computer to activate the new partition.
6. Format each of the new drives.

How do I wipe a Windows hard drive?

Select the Settings option. On the left side of the screen, select Remove everything and reinstall Windows. On the Reset your PC screen, click Next. On the Do you want to fully clean your drive screen, select Just remove my files to do a quick deletion or select Fully clean the drive to have all files erased.

What is the maximum size hard drive for Windows 98?

127 GB / 128 GB / 137 GB maximum hard drive capacity in Windows 98. The 28 bit LBA supports 2^28 sectors which works out to 268435456 sectors. Each sector holds 512 bytes and therefore the maximum capacity is 137438953472 bytes. This is the maximum Windows 98 supports for a bootable hard drive.

What is a Windows 98 boot disk?

These disks are original boot floppy disk media for use with Microsoft Windows CD-ROMs. Not all Windows 9x/ME CDs are bootable, not all CDs included boot disks, and DOS will not see a CD-ROM drive unless a driver is loaded.

How do you erase a hard drive?

We’ve updated this with Windows 11 and Android 12 information….Android

1. Open Settings.
2. Tap System.
3. Tap Reset options.
4. Tap Erase all data and follow the on-screen directions.

How many GB is Windows 98?

The typical Windows 98 or 98SE installation requires about 195MB of hard disk space. Installation can take as little as 120MB of disk space or up to 295MB, depending on your system and the options you choose to install.

What file system does Windows 98 use?

FAT32
List of default file systems

What is the first step in creating a bootable disk?

To create a bootable USB flash drive

1. Insert a USB flash drive into a running computer.
2. Open a Command Prompt window as an administrator.
3. Type diskpart .
4. In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk , and then click ENTER.