How do I log into my SonicWall TZ 105?

How do I log into my SonicWall TZ 105?

You log into the SonicWall management Interface using https://IP Address where the IP address is the SonicWall LAN IP address. EXAMPLE: If the LAN IP address of your SonicWall appliance is 192.168. 168.1, you can log into it by typing https://192.168.168.1.

How do I reset my SonicWall TZ 105?

Globalfly Technologies

1. Hold down the reset button for 10 seconds.
2. The device will reboot when you release the reset button.
3. Set your computers IP address to 192.168.
4. Connect your computer to the LAN port on the SonicWALL TZ.
5. Click the boot icon next to “Current Firmware with Factory Default Settings.”

What is SonicWall default password?

SonicWall Default IP Address: 192.168. 1.254. Administration Credentials: admin | password.

How do I log into my SonicWall switch?

Bring up a browser and address the Switch management console: https://192.168.0.239. Enter username as admin and password as password to start a management console session for the first time. NOTE: By default, the switch will be in DHCP and will receive an IP from the SonicWall interface used for provisioning.

How do I find my network administrator password?

How to Find a Domain Admin Password

1. Log in to your admin workstation with your user name and password that has administrator privileges.
2. Type “net user /?” to view all your options for the “net user” command.
3. Type “net user administrator * /domain” and press “Enter.” Change “domain” with your domain network name.

How do I reset my SonicWALL to factory settings?

Open a Web browser on your computer, type “192.168. 168.168” into the URL box and press “Enter.” On the SafeMode Management display, click the boot icon on the “Current Firmware with Factory Default Settings” line. This will reboot the SonicWALL to its factory settings state and you can now reconfigure as needed.

What is my SonicWall username?

The default username for your SonicWALL router is admin. The default password is password. Enter the username & password, hit “Enter” and now you should see the control panel of your router.

How do I reset my SonicWall to factory settings?

How do I reset my SonicWALL TZ 350?

How do I reset my SonicWall TZ 215 to factory defaults?

Load factory default configuration on the Sonicwall TZ 215

1. Power off the Sonicwall TZ 215.
2. Using a pin hold down the reset button and power the Sonicwall TZ 215 on.
3. Release the reset button once the wrench light begins to blink on the front of the Sonicwall TZ 215.

How do I reset my SonicWALL TZ 370?