How do I update firmware on APC Network Management Card?
Table of Contents
How do I update firmware on APC Network Management Card?
APC UPS – Upgrading the Firmware
- Access the APC website support area and download the lastest version of firmware to your Network Management Interface.
- Extract and start the firmware upgrade utility.
- Enter the IP address of your UPS, enter the APC username and it’s password.
How do I reset my APC Network Management Card?
1.) Hold down the Reset button for 20-25 seconds, ensuring the Status LED is pulsing green during this time. 2.) When the Status LED change to amber or orange, release the Reset button to allow the NMC to complete its reboot process.
How do I update my ap9631?
Locate and click the Firmware Upgrade Utility application. Enter your Username and Password. The default values are both lowercase “apc”. Click the Ping button to assure you have connectivity with the card to be upgraded.
How long does APC warranty last?
American Power Conversion (APC) warrants its Smart-UPS (Products) to be free from defects in materials and workmanship for a period of three (3) years, excluding the batteries, which are warranted for two (2) years, from date of purchase.
How do I reset my apc battery backup?
To do this, follow the below procedure;
- Disconnect any attached load.
- Unplug the UPS from the wall socket.
- Disconnect the UPS’ internal battery.
- Push and hold the “”On”” button on the UPS for 5 seconds.
- Reconnect internal battery.
- Plug UPS in to known good power source.
- Turn UPS on.
How do I reset my ap9631 network management card?
Hold the reset button for 5-7 seconds. Resets only the password. Hold the reset button for 20 seconds. This will restore the card to factory default settings including switching back to DHCP mode.
How do I find my APC UPS manufacture date?
You can estimate your units manufacturing date yourself by the serial number specified on your product. The third and fourth digits indicate the year your unit was manufactured, while the following 2 characters are the week your unit was manufactured.
How long does a APC UPS battery last?
three to five years
Most APC batteries should last three to five years. There are many factors which affect Battery life including environment and number of discharges.
