How do you unjam a Bostitch bht150?
Table of Contents
How do you unjam a Bostitch bht150?
How to Unjam a Bostitch Stapler
- Disconnect the construction stapler from the air supply. Use a hammer and punch to do this.
- Push the driver upwards and past the jammed staple.
- Tap the hammer against the punch and the jam should clear.
What size staples does a Bostitch staple gun take?
Bostitch BTFP71875 pneumatic tacker & brad nailer. It drives both heavy duty 3/8-inch crown staples (T50) and 18 ga brad nails for a wide range of applications.
How do you fix a Bostitch heavy duty stapler?
How to Fix a Jammed Heavy-Duty Stapler
- Firmly grab the handle of the heavy-duty stapler.
- Pull out the remaining good staple clip and set it aside.
- Grab the jammed staple with the needle-nosed pliers and pull it out.
- Insert the solid clip of staples back into the head of the stapler.
What size is a b8 staple?
3/8 in.
Bostitch B8 PowerCrown Premium Staples, 3/8″ Size, Box Of 5,000
| Item # | 892729 |
|---|---|
| color | Silver |
| capacity | 45 sheets |
| Size (Staple) | 3/8 in. |
| Size (Strip) | Full |
What size Staples does a Stanley TR100 use?
1/4″
Bostitch SharpShooter™ Heavy duty tacker staples have a leg size of 1/4″. Staples® can be used with Stanley® Bostitch SharpShooter™ Tacker, sold as 1000 staples per box. These Heavy Duty, Narrow Crown staples fit TR100, TR200, TRE500 series, PHT150, PHT250 and Arrow® T-50 staplers.
How do I open a Bostitch stapler?
According to the instructions from Bostitch, hold down the bottom of the stapler with your free hand. Pull the arm upward to open the hinge that holds it over the carrying tray. Push the arm back until the tension on the hinge is relieved and the carrying tray is fully exposed.
How do I load a Bostitch stapler?
Grasp the arm and close it down over the carrying tray. As you move the arm downward, you will feel the tension of the hinge return. Push down forcefully on the the arm to make a test staple. The stapler is now loaded and should be ready for use.
