Is IC 7473 is a JK flip-flop?
Table of Contents
Is IC 7473 is a JK flip-flop?
The IC 7473 or mostly known as 74LS73 is a dual JK flip Flop logic gate IC. It is a negative edge-triggered IC. It has two independent JK Flip Flops. They have complementary outputs.
What is ic7476?
The 7476 is a master—slave J-K and the 74LS76 is a negative edge-triggered J-K flip-flop. Both chips have the same pin configuration. Both chips have synchronous inputs of J, K and Cp. Both chips have asynchronous inputs.
What does CLR mean in an IC?
CLR. This is a Clear pin, which will instantly reset all the outputs to LOW, or 0. LOAD’. The LOAD’ pin tells the chip to LOAD the data from pins A through D into outputs Qa to Qd on the next clock pulse.
Which IC is used in JK flip-flop?
The IC used is MC74HC73A (Dual JK-type flip-flop with RESET). It is a 14 pin package which contains 2 individual JK flip-flop inside.
What does CLR mean on IC?
What is a CD 4013 IC?
The CD4013B device consists of two identical, independent data-type flip-flops. Each flip-flop has independent data, set, reset, and clock inputs and Q and Q outputs. These devices can be used for shift register applications, and, by connecting Q output to the data input, for counter and toggle applications.
What does SCK mean on a circuit board?
SCK (Clock in) This is the clocking input that the load cell circuit needs in order to transfer out the digital sensor reading from DT terminal port.
What is CLK in JK flip flop?
The input signals J and K are connected to the gated “master” SR flip flop which “locks” the input condition while the clock (Clk) input is “HIGH” at logic level “1”. As the clock input of the “slave” flip flop is the inverse (complement) of the “master” clock input, the “slave” SR flip flop does not toggle.
What is CLR in J-K flip-flop?
The output changes state by signals applied to one or more control inputs. The basic JK Flip Flop has J,K inputs and a clock input and outputs Q and Q (the inverse of Q). Optionally it may also include the PR (Preset) and CLR (Clear) control inputs.
What is ic7474?
The Integrated-Circuit D Flip-Flop (7474) The 7474 is an edge-triggered device. The Q output will change only on the edge of the input trigger pulse. The small triangle on the clock (Cp) input of the symbol indicates that the device is positive edge-triggered. The D and the clock inputs are synchronous inputs.
