What holds a Belfast sink in place?
Table of Contents
What holds a Belfast sink in place?
To help keep things secured, next apply a layer of silicone sealant around the rim of the sides, and back wall of the sink. This is essentially in all the places your worktop counter will come into contact with your sink.
How should a Belfast sink be fitted?
If unsure of fitting your sink we recommend seeking the advice of a professional fitter.
- Belfast sinks should be fitted with a worktop overhang of.
- approximately 10 mm on the back and sides of the bowl.
- and the depth of the cut out should allow the front wall of.
- the sink to project out by half the depth of the sink wall.
How do you attach a Belfast sink to a unit?
INSTALLING YOUR BELFAST SINK First, connect the waste kit(s) to the sink. Place the sink in position on the cabinet. Apply a generous amount of quality silicone around the rim of the sink, on the two sides and back edge (if you have decided to have no worktop overhang, this step can be skipped). Wipe away any excess.
Should worktop overhang Belfast sink?
You are right to consider the benefits that a worktop overhang can offer, as – indeed – any overflowing water could cause significant damage if left to sit on the worktop beneath your Belfast sink for an extended period of time. We recommend an overhang of between 7 and 10mm.
Do you glue Belfast sink?
Tip ! Try and resist the temptation to glue the Belfast in place before the worktop is fitted. As ceramic sinks are fired after moulding they are rarely perfectly straight or square. You will need a bit of “wriggle” room to adjust the sink to a best fit after the worktop is fitted in place.
Are Belfast sinks good?
Belfast sinks are very easy to clean, and very durable. It is worth remembering however that should you drop a more delicate item of crockery in a Belfast sink there is a chance there is a higher chance it will break than with a stainless-steel sink, due to the nature of the material it is made from.
Should a Belfast sink stick out?
It is usually recommended a nominal 10mm to overhang the sink but up to 15mm is fine to ensure a good even overhang. At this point there is usually a small gap between the sink and worktop, fill the gap with a bead of silicone.
Are Belfast sinks practical?
The Belfast sink is not a showy kind of fancy sink. It has endured throughout the years with a simple, yet highly functional and practical design that suits its purpose perfectly. Despite that, most people find the aesthetics of a Belfast sink to be quite pleasing to the eye.
Can you use laminate worktops with a Belfast sink?
In answer to your question, Belfast sinks are not commonly recommended with laminate worktops. This is because of the way the sinks are positioned as undermounted solutions. In order to accommodate a Belfast sink, you would need to cut out a suitable aperture, then re-finish the exposed chipboard with edging strip.
What is the difference between a butler sink and a Belfast sink?
The Belfast sink is a variation of the Butler sink; the only difference being that, traditionally, the Belfast had an overflow and the Butler had a shallower bowl with no overflow. Nowadays, both the Belfast and the Butler have overflows, although a weir overflow is only found on the Belfast sink.
What worktops work with Belfast sink?
Which worktops with a Belfast or Butler sink? Bushboard Evolve and Bushboard MStone worktops are both suited to a Belfast or Butler sink because they are very unlikely to suffer from water ingress.
Should you silicone around a kitchen sink?
Creating a seal around the kitchen sink is a simple step often overlooked by DIYers. Sealing around kitchen sinks or sealing a sink drain with silicone will keep your sink in good condition and prevent future problems. Using a high quality, waterproof sealant prevents water and debris from entering the gaps.
How much should a Belfast sink overhang?
What worktop can you have with a Belfast sink?
A Belfast sink sits on top of a base unit, with a solid surface worktop. They are usually made of ceramic but you can get Stainless Steel ones. They can fit in beautifully with any classic kitchen design that you choose, but again it is NOT suitable with Laminate worktops.
