What is the Janome HP plate?

What is the Janome HP plate?

The matching HP Needle Plate is a straight stitch plate, which further increases the stitch quality. The combination makes it perfect for curves and precise stitching. The shape of the slit at the front of the foot also contributes to its superior visibility. t.

Where is the stitch plate on a sewing machine?

A sewing machine throat plate is the metal plate beneath a sewing machine’s needle and presser foot. It is typically held in place with one or more screws. A sewing machine throat plate has holes or slots for the needle to pass through as it moves up and down to stitch the fabric.

What is a needle stitch plate?

The stitch plate covers the stitching area of a sewing machine, leaving the feed dog exposed and an opening for the needle. Each BERNINA machine comes equipped with a stitch plate designed for the widest stitch available on that particular model – 5.5 or 9 mm.

What does a stitch plate do?

The Straight stitch needle plate for your machine is one of the very best accessories to help improve machine piecing and machine quilting. The needle opening in the standard (zigzag) stitch plate is open to accommodate the width of your machine’s widest stitch.

What is the Janome Acufeed system?

The system uses Upper Feed Teeth in conjunction with the Lower Feed Teeth to gently move the multiple layers of fabric through the machine. The Upper feed teeth move with the fabric as the Lower feed teeth move, feeding both the top and bottom layers of fabric at the same time.

Why throat plate is called needle plate?

Throat Plate (5) This metal plate, sometimes called a needle plate, sits below the needle and presser foot. A small opening in the plate allows the bobbin thread to come out and the needle to pass through to make stitches.

How do you attach a needle plate cover?

Attach the cover by inserting the two projections on the underside of the cover into the notches on the needle plate as shown below. To remove the embroidery needle plate cover, place your fingernail in the groove and lift the plate out. Push the embroidery needle plate cover as far as possible to attach it.

What is needle plate or throat plate in sewing machine?

A needle plate, also known as the throat plate, is a removable metal shield found on all sewing machines. This little metal shield is used to cover the bobbin area of your machine. However, some machines use special needle plates to help you with your sewing.

What is Janome foot f used for?

The Satin Stitch Foot F is a closed toe foot designed to be used for both decorative and straight stitches. It takes full advantage of the Horizon Memory Craft 12000’s 9mm stitch width and comes standard with the machine. For straight stitching, the foot has a marker on the front to indicate where the stitch will land.

Is a dual feed foot the same as a walking foot?

The Walking Foot moves all layers at the same time and pace according to the movement of the feed dog. The Dual Feed function affects the top layer and the feed dog controls the feed of the bottom layer. The Walking Foot has no motor and the foot, dependent the feed dog movement, moves all layers at one time.

What does the needle plate do on a sewing machine?

This metal plate, sometimes called a needle plate, sits below the needle and presser foot. A small opening in the plate allows the bobbin thread to come out and the needle to pass through to make stitches.

What is a satin stitch foot used for?

The Satin Stitch Foot, is also sometimes called an “applique” or “special purpose” foot, is used for sewing decorative stitching or surface embellishments on many types of projects. The Satin Stitch Foot has a tunnel or groove on the underside which allows the foot to glide freely over decorative or heavy stitching.