What is the proper spacing for cable railing?
Table of Contents
What is the proper spacing for cable railing?
3″
The industry standard for cable spacing is 3″. For a 36″ railing this means that it usually takes 10 strands of cable to get to that spacing. The X factor in any cable railing is how taut the cables are.
Does a cable railing need a top rail?
A top rail is always necessary when building a wood railing with cable railing infill. The top rail should always be installed to absorb and deflect the pressure applied when cable is tensioned. It is highly recommended to secure the top rails between the post rather than simply placing the rail on top of the posts.
What is the height of a stair railing?
Answer: Section 1926.1052 (Stairways) states: (c) Stairrails and handrails. (6) The height of handrails shall be not more than 37 inches (94 cm) nor less than 30 inches (76 cm) from the upper surface of the handrail to the surface of the tread, in line with the face of the riser at the forward edge of the tread.
How long can a railing be without a post?
You’ll need to install posts on either side of the stringer where the stairs meet the deck, which will affect the spacing of the other posts on that side. For stairs with stringers more than 5.5 feet long, you’ll need to install additional posts between the head and foot of the stairs.
Does cable railing need a top rail?
Are cable railings safe?
From a structural standpoint, today’s cable railing systems are some of the safest and most durable guardrails available. Due to the novelty and increased popularity of these systems, cable railings have at times been held to tighter standards than traditional vertical picket railings.
What angle should a handrail be?
The angle should be between 20 and 38 degrees.
What is the maximum distance between balusters?
U.S. building codes mandate that balusters have no more than a 4-inch gap between them. This relatively tight amount of spacing still allows for visibility between spindles, but also stands as a safety measure to prevent small children from becoming stuck between spindles or from slipping through the balusters.
Do you need a return on a handrail?
Handrail extensions must return to a wall, itself or the walking surface. Note: While it is a common practice to leave a gap between a wall return and the wall, some inspectors have rejected this as they consider it a return toward the wall and not a return to the wall.
