What is the rpm of 1/3 hp motor?
Table of Contents
What is the rpm of 1/3 hp motor?
1/3 HP Marathon Electric Motor, 1500 rpm
| Speed | 1500 rpm |
|---|---|
| Phase | Single Phase |
| No. of Poles | 4 |
| Voltage | 220 V |
| Mounting Type | Foot |
What is a geared motor used for?
Electric Gear motors are used in applications that require high output torque and lower output shaft rotational speed, especially where space and available power are limited. This describes a wide range of common equipment applications across multiple industries.
What is the meaning of HP motor?
The horsepower metric is defined as the work done by a force of 550 pounds acting through one foot in one second, or foot-pounds of work, the unit of power needed to raise 550 pounds one foot in one second.
What is a split phase motor?
A split-phase induction motor is a type of single-phase induction motor in which the stator is provided with a starting or auxiliary winding (S) and a main or running winding (M). The starting winding is displaced by 90° from the main winding as shown in the figure.
How many amps does a 3 HP motor draw?
AMP DRAW BASED ON HORSEPOWER
| HP | 1 Phase Amps | 3 Phase Amps |
|---|---|---|
| 115 volt | 208 volt | |
| 3 | 34 | 10.6 |
| 5 | 56 | 16.7 |
| 7-1/2 | 80 | 24.2 |
What type of motor is a gear motor?
electric motor
A gearmotor (or geared motor) is a small electric motor (AC induction, permanent magnet DC, or brushless DC) designed with an integral (non-separable) gear reducer (gearhead) attached.
What are the main advantages of gear motor?
10 Advantages of Geared Motors
- High Torque Output.
- Speed Reduction.
- High Resolution.
- Drive Large Inertial Loads.
- Shorter Positioning Time.
- Downsize.
- Improved Damping Characteristics.
- Increased Axial and Radial Load.
How do I choose a geared motor?
Selecting and Sizing Geared Motors
- Consider the Application Requirements.
- Select the Correct Gear Technology for the Application.
- Motor Selection (Size, voltage, frequency)
- Adjust the Torque/Speed selection.
- Select Gearmotor Options (Mounting Style)
- Choose the Motor Options.
- General Options.
What does 3 hp stand for?
What is 3HP? 3HP is one of several regimens CDC recommends for treatment of latent TB infection. The term 3HP comes from the regimen duration (once weekly doses for three months) and the abbreviations of each of the two drugs, isoniazid (INH) and rifapentine (RPT), in the regimen.
What is the difference between split-phase and single-phase?
Single phase power systems are defined by having an AC source with only one voltage waveform. A split-phase power system is one with multiple (in-phase) AC voltage sources connected in series, delivering power to loads at more than one voltage, with more than two wires.
What are the advantages of a split-phase motor?
The advantages of a split phase induction motor include the following. The motor is economical & can be changed once it wears out before trying to reverse it. These are available in different frame sizes so that they can be placed effortlessly in most of the machines.
What size breaker do I need for a 3 HP motor?
How to Calculate How What Size Circuit Breaker a Machine will Need:
| HorsePower of Main Motor | 220 Volts, 1 phase | 220 Volts, 3 phase |
|---|---|---|
| 1 Hp | 5.6 Amps | 2.8 |
| 2 | 11.2 | 5.6 |
| 3 | 16.8 | 8.4 |
| 4 | 22.4 | 11.2 |
What is the full load current of a 1 hp motor?
Full Load Current: Three Phase AC Motors
| Motor Horsepower | Motor Ampere | |
|---|---|---|
| 1 | 230V 460 V | 4.2 2.1 |
| 1-1/2 | 230V 460V | 6.0 3.0 |
| 2 | 230V 460V | 6.8 3.4 |
| 3 | 230V 460V | 9.6 4.8 |
How do I choose a gearbox motor?
How to Select a Gearbox
- Speed and horsepower of the input.
- Desired output speed or desired output torque (will determine ratio)
- Characteristics of use; hours per day, nature of shock or vibration in the system.
- Degree of overhung load.
- Unit configuration, shaft input or hollow bore input, shaft output or hollow bore output.
