What is the standard depth of an undermount bathroom sink?
Table of Contents
What is the standard depth of an undermount bathroom sink?
While you may find double bathroom sinks in various sizes, the standard size and shape is circular between 18-20 inches and about 8” deep.
What is a good size undermount sink?
Buttrick recommends a sink that is at least 27 inches long, 19 inches wide, and 7.25 inches deep. “Once you factor in the three-quarter-inch counter depth, the sink is eight inches deep,” he says. Similar-size models are also available commercially.
How deep is a deep basin sink?
Going Deep Most kitchen sinks vary from 8 to 10 inches in depth. While a sink with a 10 inch depth makes it easier to soak pots and pans, deeper sinks can be more uncomfortable for shorter family members to use. Shallow sinks allow for easier reaching and prep work.
What is the average depth of a bathroom vanity?
21 inches
The standard vanity depth is 21 inches. But you can gain floor space in a small bath by trimming at least part of the vanity to 18, 15, or even 12 inches deep.
How do you measure an undermount bathroom sink?
Measure width from side to side and length from front to back–where you measure will depend on the installation type. Be sure to refer to the specification sheet for exact dimensions. Height and depth are two separate measurements. Height is the full measure taken on the exterior from top to bottom.
How do you measure the depth of a bathroom sink?
Here’s how to measure for a basin
- Start with the width. Measure the distance from one side of the basin to the other.
- Next, measure the length. This is the distance from the rear of the basin to the front.
- Then, on the exterior of the basin, measure from the top to the bottom.
- Finally, measure the depth.
Is 10 inches too deep for a sink?
Kitchen sink depths commonly fall between the range of 7 inches to 12. However, the optimum range is 8-10 inches. Below or above this range may not necessarily be comfortable for all users. Cabinet size, domestic habits, and even your height can influence how much discomfort you experience.
How can I make my vanity deeper?
The standard vanity height is 32 inches. However, “comfort height” vanities, at 36 inches tall, have become the norm in recent years….How to Make a Vanity Deeper
- leave the back as is,
- adjust the location of the back support (i.e. de-attach and re-attach),
- or add additional support to the back with scrap wood.
What is considered a shallow sink?
Shallow kitchen sinks are ideal for people who only hand-wash a few dishes here and there and want to maximize their under-sink storage space. If you’re under 5 feet, 5 inches tall, and you’re the primary sink user, a shallow sink with a depth of 8 inches will be comfortable for you.
How deep is a drop in sink?
Undermount And Drop-in Sink Basin Comparison Overall a deeper sink is more desirable. Drop-in sinks are usually not as deep as an undermount sink. Drop-in sinks are usually 6 inches deep compared to 8 inches or 9 inches for undermount sinks. For this reason a lot of people prefer an undermount sink over a drop-in sink.
How do you measure for a bathroom undermount sink?
