Why does my car heater only work on 4?
Table of Contents
Why does my car heater only work on 4?
Most car manufacturers use a series of resistors to make the heater blower motor run at different speeds. And when one or more of these resistors burn out, you’re usually left with only one heater blower motor speed—high. The resistor module is easy and inexpensive to replace.
What causes a heater not to heat?
Dirty and clogged filters are one of the primary causes of furnace problems and can cause high operating costs. The heat exchanger can overheat and shut off quickly when filters are clogged with dust and dirt. This also causes soot buildup on the heat exchanger, which makes your furnace run less efficiently.
Why does my heater only work on the highest setting?
If your heater only blows when the setting is on high, this may suggest that you have a faulty blower motor resistor. The highest speed setting may still work because in most cars in the highest fan speed settings the current bypasses the blower motor resistor.
Why does my heat and air only work on high?
When the resistor fails, typically, the highest setting is the only option that still functions. This is because the air from the blower motor is bypassing the resistor, thus gaining the maximum amount of voltage, resulting in full power. In other cases, there could be an issue with your AC module or the fan switch.
How much does it cost to fix heater in car?
The total cost of parts and labor will range between $800 and $1,000 to have your heater core fixed by a professional. Labor costs vary, so call ahead and get a quote from multiple repair shops. If you fix the heater yourself, you’ll only have to pay for the cost of a new heater core which runs between $100 and $300.
Is there a fuse for car heater?
A: Your car’s heater does indeed have a fuse. You can check to see if the heater fuse is shot by looking inside your fuse box. You’ll need your car’s dusty manual to find out where your fuse box is and which fuse is for the heater.
Why is my air only working on high?
When a blower resistor fails, the highest fan speed usually is the only one that still works because it essentially bypasses the resistor and receives the maximum amount of voltage. When the resistor is working, it reduces the amount of voltage going to the lower fan speeds, so the fan runs slower.
How much does it cost to replace a blower resistor?
The average cost to replace the blower motor resistor at a repair shop is between $44 and $55 in parts and $70 in labor costs, for a total cost of around $114 to $125.
Why does my air con only work on 4?
This is because the air from the blower motor is bypassing the resistor, thus gaining the maximum amount of voltage, resulting in full power. In other cases, there could be an issue with your AC module or the fan switch.
How do you diagnose a car heater problem?
Use these steps to troubleshoot your car heater.
- Check the Coolant. Low coolant can’t reach the heater core and generate warm air.
- Assess the Heater Core. Make sure heater hoses are in good shape.
- Inspect the Water Pump.
- Listen to the Fan.
- Look for Blown Fuses.
