Can RFID be used to track location?

Can RFID be used to track location?

Location Tracking – RTLS with Active RFID Systems They allow businesses to track the real-time movement of assets and people throughout a monitored area. Litum RTLS systems can track tags from afar with the highest accuracy available in the market.

How does RFID work for tracking?

The RFID reader is a network-connected device that can be portable or permanently attached. It uses radio waves to transmit signals that activate the tag. Once activated, the tag sends a wave back to the antenna, where it is translated into data. The transponder is in the RFID tag itself.

How accurate is RFID distance?

Because the tag is sending out a signal, like a cell phone, the tags can be read from much further away—1,000 meters or more. You can cover a large area with fewer readers than a passive RTLS, but the tags cost more. The location accuracy of an active RTLS is usually within 3 meters.

How accurate is RFID tracking?

“RFID increases inventory accuracy, from an average of 65 percent to more than 95 percent. And high inventory accuracy can lead to increased sales—but only if retailers use the data to improve their operations and processes.

How far can you track RFID?

Passive low-frequency (LF) and high-frequency (HF) tags can be read from a distance of up to 3 feet (0.9 meter), while passive ultrahigh-frequency (UHF) RFID transponders can typically be read from 10 to 20 feet (3 to 6 meters) away.

What is the maximum range of RFID reader?

Active RFID systems typically operate in the ultra-high frequency (UHF) band and offer a range of up to 100 m.

What is the longest range for RFID reader?

RFID is a contactless technology that can operate over a range from a few centimetres to several metres, using frequencies of 120 to 150 kHz (Low Frequency, or LF), 13.56 MHz (High Frequency, or HF) and 860 to 960 MHz (Ultra-High Frequency, or UHF).

Can you track someone with a RFID tag?

An Active RFID system can be implemented quickly enabling you to track people in locations that you would have needed expensive GPS devices in the past. With Active RFID, you can track people anywhere as they move freely without the need for portal technology.

What frequency does active RFID use?

The ultra high frequency range includes frequencies from 300 to 1000 MHz, but only two frequency ranges, 433 MHz and 860–960 MHz, are used for RFID applications. The 433 MHz frequency is used for active tags, while the 860–960 MHz range is used mostly for passive tags and some semi-passive tags.

What is localization RFID?

Each asset to be localized is tagged. A fully automated RFID system is initiated where the RFID reader (mounted on a platform or carried by an operator) collects the reads from the tags and a localisation algorithm will process the data and tag localisation result will be displayed on the android phone.