How do I connect my bixolon Bluetooth printer?

How do I connect my bixolon Bluetooth printer?

Connecting the printer

1. Turn off the power to all devices – PDA, PC (Bluetooth dongle), printer, etc.
2. Execute the Bluetooth connection program from PDA or PC.
3. Search the peripheral devices to connect – search the printer.
4. Register the searched printer (SPP-R200).
5. Test the connection.

How do I reset my Bixolon printer?

How to do Factory Reset?

1. Depress the Pause button for two seconds during Print Standby Mode.
2. Both LEDs will change to orange color and the printer will be set to Stand-alone. Configuration Mode.
3. Depress the Feed button at the 3rd LED sequence as shown in section 5-2-2 (Status.

How do you calibrate bixolon?

You can use the automatic calibration function to solve this issue.

1. Turn off the printer in the label mode.
2. Turn on the power while depressing the Feed button.
3. Check the printing, and press the power button one more time to use the automatic calibration function.

How do I find the IP address of my Bixolon printer?

The default network mode for B-gate is adhoc, ESSID is BIXOLON_adhoc, and IP address is 192.168. 1.1. If the value is infra, connect the host to the AP connected to the B-gate.

How do I connect Iphone to Bluetooth printer?

Select Settings > Hardware > Printers > Create Printer Station. Enter a name for your printer, and tap No Printer Selected. Select Connect a Bluetooth Printer and follow the on-screen instructions.

How do you calibrate a thermal printer?

Calibrate ZP450 / ZP500 / ZP505 model thermal printer

1. Load the printer with the labels for your application.
2. Power on the printer.
3. Press and hold the Feed Button until it flashes two times then release it.
4. Allow the printer to complete feeding labels and printing a sensor profile.
5. The printer should now be calibrated.

How do I calibrate my Bixolon SRP 770ii?

sensor auto-calibration function for a proper detection.

1. Make sure that paper roll has been installed properly.
2. Turn on the power while holding down FEED button with cover open.
3. Close the ribbon roll and paper cover.
4. Press the paper feed button.
5. Gap sensor auto-calibration is complete.

How do I find Epson printer IP address?

In Windows 10, select the printer on the list, click the Manage button, and then click the Printer properties option on the left side of the printer settings window. Click the Ports tab in the Printer Properties window. The IP address of the printer may show in the port listing.

How do I change the IP address on my Bixolon printer?

1) Open the BGATE WebCONFIG Tool by entering the B-gate’s IP address in the address bar of the web browser. 2) Click Configuration >> Set WLAN TCP/IP menu. 3) After entering the required WLAN information click on the Set WLAN IP button.

How do I pair my phone with my printer?

To connect your phone via the Default Print Service, go into the phone’s settings, search for “printing”, then select it from the results. Next, tap Printing in the list of Connection preferences, select Default Print Service and turn it on. A list of compatible printers on the network should appear.

How do you add a printer to your iPhone?

To set up a printer on your iPhone or iPad without AirPrint and use it to print:

1. Open your printer’s app on your device.
2. Turn on your printer’s Wi-Fi.
3. Go into your phone or tablet’s “Settings” and hit the Wi-Fi tab.
4. Locate your printer under “OTHER NETWORKS” and tap on it.

How do I locate the IP address for my printer?

How to Find Your Printer’s IP Address

1. Open your printer’s Control Panel.
2. Go to Settings.
3. Click Wireless Settings.
4. Print a page called Network Configuration, which will contain your printer’s IP address.

How do I change the IP address on my Bixolon SRP 350?

To configure a static IP address on the printer:

1. Turn off the printer.
2. Turn on the printer.
3. Wait 10 seconds and use a paperclip to press the function key.
4. On the printed report it will show the Ethernet Settings.
5. Using a web browser that is on the same network navigate to the IP address from the report.