How do I log into my HP switch?

How do I log into my HP switch?

On the computer connected to the new HP Switch you need to: Open a browser software, enter the IP address of your Switch and access the HP Switch web interface. On the prompt screen, enter the administrative login information. After a successful login, the administrative menu will be displayed.

How do I assign an IP address to an HP switch?

WebAgent: configuring IP addressing

  1. In the navigation pane, click on Home.
  2. Click on Quick Setup.
  3. In the Switch Quick Setup Parameters box, click on Change.
  4. Enter the IP address and any other information such as the Subnet mask and Gateway.
  5. Click on Save to save changes.

How do I reset my HP Procurve 2848 to factory settings?

To execute the factory default reset on the switch, perform these steps:

  1. Using pointed objects, simultaneously press both the Reset and Clear buttons on the front of the switch.
  2. Continue to press the Clear button while releasing the Reset button.
  3. When the Self Test LED begins to blink, release the Clear button.

How do I factory reset my HP 1910 8g Switch?

Restore to factory default configuration….HP V1910-48G JE009A Factory reset – Password recovery capability enabled.

  1. Connect switch cable to COM.
  2. Open Putty on COM 38400 – 8 – 1 – N.
  3. Powercycle the switch.
  4. Press Ctrl-B at boot to enter extended boot menu.
  5. Skip current system configuration.
  6. Reboot.

How do I log into my HP ProCurve Switch?

Log into your ProCurve using SSH or Telnet. Select Run Setup in the menu either by hitting 8 or using the arrow keys then hitting enter. Using the arrow keys, select Logon Default. Hit space to change Logon Default to CLI.

How do I telnet to an HP switch?

To begin a Telnet session to the switch console:

  1. Click the Configuration tab.
  2. Click Device View.
  3. Click telnet session to the switch console to open a telnet window displaying the switch’s CLI.
  • October 3, 2022