How do I setup my Motorola Surfboard SB6121?

How do I setup my Motorola Surfboard SB6121?

Connect the coaxial cable to a cable wall outlet (if not connected) and the Cable connector on the rear of the SB6121 cable modem. Hand-tighten the connectors to avoid damaging them. Connect the Ethernet cable to the Ethernet port on the computer or router and to the Ethernet port on the back of the SB6121 cable modem.

Is surfboard SB6121 obsolete?

The SB6121 is being phased out and replaced by the SB6141. However there are many SB6121s still available for purchase, and we’ll continue to provide technical support for this device.

How do I reset my SB6121 modem?

Resetting the SB6121

1. Disconnect the coaxial cable.
2. Power cycle the unit by disconnecting the power cord for 10 seconds, then reconnect the power cord.
3. Click the Configuration link on top.
4. Click the Reset All Defaults button (as shown below).
5. When asked, Do you want to proceed?, click the OK button.

Does Motorola sb6121 have WIFI?

Wired modem only, does NOT include WIFI Router or VOIP Telephone adapter. Gigabit Ethernet port to connect to computer or Router for fast downloads.

Does Motorola SB6121 have WIFI?

Is Motorola SB6141 still good?

While it doesn’t have some of the best physical features, like a power button, the SB6141 is a great choice and will serve most people well. The low operating temperature, high ISP compatibility and high speeds make the SB 6141 a good choice for a basic modem.

Is Motorola same as Arris?

ARRIS acquired Motorola Home in 2013. The products, heritage, intellectual property, and innovation associated with that division now reside under the ARRIS brand.

What do the lights on my SURFboard modem mean?

A solid light indicates the modem is powered on. When the light is flashing the modem is scanning for a receive channel connection. A solid light indicates the channel connection is acquired. When the light is flashing, the modem is scanning for the send channel connection.

What do the lights mean on a surfboard SB6141?

What do the lights on my SB6141 mean? Answer. The SB6141 front panel LED indicators provide the following status information for power, communications, and errors: During normal operation, the POWER, RECEIVE, SEND, and ONLINE lights are ON. The LINK light flashes when the cable modem is transferring data.

How Fast Is Arris SB6121?

With download speeds up to 343 Mbps and Wi-Fi speeds up to 1600 Mbps your gaming and video streaming just got better! Beamforming technology provides maximum Wi-Fi coverage and performance.

What do the lights on my Motorola modem mean?

How do I activate my cable modem?

Connect the coaxial cable from the cable outlet on the wall to the back of your modem. Plug the power cord into the power port on the back of your modem and the other end into an electrical outlet that is not connected to a switch. Result: The modem lights start to flash and light up.

Does Motorola SURFboard sb6121 have WIFI?

The SB6121 delivers your complete personal media experience, at incredible broadband speeds….

Is the Motorola sb6121 a wireless modem?

Wired modem only, does NOT include WIFI Router or VOIP Telephone adapter. Gigabit Ethernet port to connect to computer or Router for fast downloads. Internet speeds based on your Cable providers service – up to 172 Mbps download and 131 Mbps upload.

What lights should blink on my modem?

A blinking light means you are having difficulty connecting to the internet. Ensure all telephone cable connections are tight and secure and reboot the modem and router (if applicable). POWER: A solid green light indicates the unit is properly connected to power. A blinking red light indicates a possible modem failure.