How do you convert PPG to psi?
Table of Contents
How do you convert PPG to psi?
To convert pounds per gallon (ppg) to pressure gradient (psi/ft) Mud gradient (psi/ft) = mud weight in ppg x 0.052 Converting 10 ppg to psi/ft =0.052×10=0.52 psi/ft.
How do you calculate ppg mud weight?
Convert specific gravity to mud weight (ppg and lb/ft3) and pressure gradient (psi/ft)
- Mud weight in ppg = specific gravity (SG) × 8.33.
- Mud weight in lb/ft3 = specific gravity × 62.4.
- Pressure gradient in psi/ft = specific gravity (SG) × 0.433.
- Mud weight in kg/m3 = specific gravity × 1000.
What is ppg density?
1. n. [Drilling Fluids] Abbreviation for density, pounds per gallon, more correctly written lbm/galUS. For example, the density of water is 8.33 ppg at 60 degF [16 degC].
How do you convert specific gravity to PPG?
Convert specific gravity to mud weight in pounds per gallon (ppg) Mud weight in ppg = specific gravity (SG) × 8.33 Example: specific gravity = 1.50 mud wt, ppg = 1.50 × 8.33 mud wt = 12.5 ppg 2.
What is the density of water in PPG?
8.337 ppg
Water Depth Fresh water has a density of 1.00 g/cm3, or 8.337 ppg (pounds per U.S. gallon).
How do you calculate gpm to PSI?
To calculate GPM from pressure in PSI for water, follow these steps:
- Measure the pressure inside the tank using a pressure gauge.
- Subtract the atmospheric pressure from the tank pressure.
- Multiply the result from step 2 by 2 and divide by the density of water.
What’s PPG stand for?
PPG. Points Per Game (basketball player statistic)
What is PPG of sea water?
Answer and Explanation: The density in pounds per gallon, or PPG, for average seawater is 8.68 lb/gal or 1.04 g/mL which is standard temperature and pressure.
What is the SI unit of specific gravity?
Specific gravity is the ratio of a material’s density with that of water at 4 °C (where it is most dense and is taken to have the value 999.974 kg m-3). It is therefore a relative quantity with no units.
What is ppg oil and gas?
1. n. [Drilling Fluids] Abbreviation for density, pounds per gallon, more correctly written lbm/galUS. For example, the density of water is 8.33 ppg at 60 degF [16 degC]. The “US” is included to differentiate between US gallons and UK gallons.
How do you convert PSI to GPM of water?
How do you calculate mud overbalance?
With over balance of 250 psi, the hydrostatic pressure required is 2,890 (2640 + 250) psi. Convert pressure into mud weight = 2890 ÷ (0.052 x 5500) = 10.2 ppg.
What is PPG material?
Polypropylene glycol, a polymer.
What is PPG of fresh water?
Fresh water has a density of 1.00 g/cm3, or 8.337 ppg (pounds per U.S. gallon).
What is the SI unit of specific heat?
joule per kelvin per kilogram
The SI unit of specific heat capacity is joule per kelvin per kilogram, J⋅kg−1⋅K−1. For example, the heat required to raise the temperature of 1 kg of water by 1 K is 4184 joules, so the specific heat capacity of water is 4184 J⋅kg−1⋅K−1.
