How do you use the Braun Pro 4000 ThermoScan?
Table of Contents
How do you use the Braun Pro 4000 ThermoScan?
operation and technique Remove the thermometer from the case and attach a new probe cover. The device turns on automatically. Wait for the “ready” beep and place the probe snugly into the ear canal; correct probe placement is essential for accurate readings. Press and release the Start Button.
Why is my Braun ear thermometer flashing?
Answer: A flashing display indicates a system error. We suggest waiting 1 minute until the thermometer turns off by itself and then turns on again. If the problem persists, reset the thermometer by removing the batteries momentarily.
How far do you put an ear thermometer?
Gently insert the tip of the thermometer into the ear canal toward the eardrum. The sensor should be pointing down the ear canal and not at the wall of the ear. Once the thermometer is in position, turn it on and wait for it to signal that the reading is complete. Remove the thermometer and read the temperature.
How do I reset my Braun ear thermometer?
Reset your Smart Ear Thermometer:
- Slide the battery cover down then pull it away to expose the battery compartment.
- Remove the batteries.
- Wait 10 seconds.
- Put the batteries back in, the same as they were before.
- Push the button to turn on the thermometer.
How accurate is the Braun ear thermometer?
It not only registered between 97.9 and 98.6°, it did so consistently, AND kept a running tab. It was actually more accurate than the old oral thermometer which was off by as much as 3 degrees (maybe the mercury is tired, but more likely it varied with the 3-5 minutes that was bearable to get a reading).
Do Braun thermometers need calibrated?
The Braun Thermoscan® PRO 6000 Ear thermometer cannot be calibrated in the field. The calibration check is only used to determine that the thermometer measurements are accurate within the specified tolerances across the measurement range.
What does error 2 mean on a thermometer?
E2 – The operational (ambient) temperature is ABOVE specification range.
