How do you use ULTIMATE EARS BOOM 2?
Table of Contents
How do you use ULTIMATE EARS BOOM 2?
- To pair UE BOOM 2 with your mobile device, press and hold the Bluetooth button until you hear the tone.
- Go to the Bluetooth settings on your mobile device and select UE BOOM 2 from the list.
- For NFC-enabled devices, hold your device directly against the UE BOOM 2, as shown, to pair and connect.
How do I know when my ULTIMATE EARS BOOM 2 is fully charged?
You can check the battery level of your WONDERBOOM 2 by pressing both the volume + and volume – buttons simultaneously. If you hear this tone, it means that your WONDERBOOM 2 is juiced up and ready to go!
How do you put Ultimate Ears boom in pairing mode?
Hold down the Bluetooth button (above the power button) until you hear a tone. NOTE: The Bluetooth connection button will blink rapidly, meaning the speaker is ready for pairing. On your device, go to the Bluetooth menu and scan for devices. Tap ULTIMATE EARS BOOM to pair.
Why is my UE Boom charging light flashing?
Charging Time: The user manual states that the speaker will completely charge in about 2.5 hours. The Power LED light will shine red when the battery is low then flash red when the battery is just about dead. After you plug in the speaker to charge, a small white LED light above the micro-USB port will start flashing.
How do I check the battery level on Ultimate Ears?
Press both volume up (+) and down (-) on the speaker itself simultaneously and the speaker will tell you the remaining battery percentage. Additionally you can check the app. Open the app for your ULTIMATE EARS speaker. The battery meter is displayed underneath the on screen ULTIMATE EARS speaker.
How do I check the battery level on my UE boom?
Press your speaker’s ‘plus’ and ‘minus’ buttons at the same time. An audio message will play telling you the current battery level. You can change the language of the message from within settings section of the app.
Can you change the bass on UE boom?
You can customize the sound signature of the UE BOOM 2 in the UE app. The bass is there, but it doesn’t go as low as most people might want.
Why won’t my Ultimate Ears speaker connect?
If your Bluetooth device won’t connect to your Ultimate Ears speaker, try the following: Make sure your speaker is turned on. Make sure your device is paired with your speaker and Bluetooth is active. Place your Bluetooth device closer to the speaker — it might be out of range.
How long does it take for a UE Boom 2 to charge?
Using the USB cable provided, and a standard USB port (e.g. Laptop) it will take approximately 5 hrs. 30 mins to recharge your Ultimate Ears Speaker to 100%. BOOM 2 can also be charged with most USB chargers and times will be faster depending on the output of the USB charger you use.
Can you use UE Boom while charging?
Yes, the Megaboom 3 can be played while charging or on the wireless charger.
How do I turn on my ultimate ear Bluetooth speaker?
To turn on your speaker, press the power button (large hash button/LED on top of the speaker) and wait for the LED to appear indicating the speaker is on. To turn off, press the same button and wait for the LED to turn off.
How long does a UE Boom 2 take to charge?
How do I know if my Ultimate Ears speaker is fully charged?
A white LED next to the micro USB charging port will illuminate and pulse while the speaker is charging. Once it is fully charged, the LED will be solid white.
How do I know if I have a UE Boom 2 battery?
You can check the battery level of your WONDERBOOM by pressing both the volume + and volume – buttons simultaneously. If you hear this tone, it indicates your battery level is high. If you hear this tone, it indicates your battery level is about half-full.
Why is my UE boom charging light flashing?
