How do you write a lock out/tag out procedure?
Table of Contents
How do you write a lock out/tag out procedure?
OSHA’s Lockout/Tagout Procedure Guidelines
- Notify all affected employees.
- Shut down the machine.
- Disconnect or isolate the machine from the energy source(s)
- Apply the lockout or tagout device(s) to the energy-isolating device(s)
- Release, restrain, or render safe all potential hazardous stored or residual energy.
What is written on a tag out tag?
This will typically include the name of the person attaching the tag, the date on which it was attached, and in many cases, details about the work that is being done.
Can anyone lock out/tag out?
Lockout or tagout shall be performed only by the authorized employees who are performing the servicing or maintenance. Notification of employees. Affected employees shall be notified by the employer or authorized employee of the application and removal of lockout devices or tagout devices.
What is the difference between a lock and a tag?
Lockout tagout is a protection system against unintentional exposure to hazardous energy from equipment and machinery. A lockout device, such as a padlock, secures the energy isolating device while a tagout device (i.e. a tag) warns employees not to use the equipment.
What 3 words must be on a lock out/tag out?
OSHA requires three basic elements in a lock-out tag-out program. These are training, written procedures, and inspections.
What are the 7 steps of LOTO?
LOTO Safety: 7 Steps of lockout tagout
- Prepare for shutdown.
- Notify all affected employees of the activities and equipment involved.
- Shut down the equipment.
- Isolate the equipment from the hazardous energy source.
- Dissipate residual energy.
- Apply applicable lockout or tagout devices.
What is required on a lockout tag?
Both locks and tags must clearly indicate the identity of the employee who applied the device. This provides positive identification as to who is servicing the machinery and equipment. The identification will also indicate who may not have finished working in a multiple lockout/tagout situation.
Who can remove a lockout/tagout device?
Lockout or tagout device removal: Each lockout or tagout device must be removed from the energy-isolating device by the employee who applied the device [29 CFR 1910.147(e)(3)].
Which is better lockout or tagout?
Lockout offers more protection than a tagout procedure. A lockout device prevents the accidental or unauthorized discharge of energy or startup of the machinery. It works by holding the equipment safely in the off position.
What are the two lockout/tagout types?
The two types of safety hasps are labeled lockout hasps, which feature write-on labels, and durable steel lockout hasps that are made of high-tensile steel.
What should be on a lock out/tag out tag?
Tags should include your name, department, how to reach you, the date and time of tagging and the reason for the lockout.
What is an example of a lockout?
Lockouts are usually implemented by simply refusing to admit employees onto company premises, and may include changing locks or hiring security guards for the premises. Other implementations include a fine for showing up, or a simple refusal of clocking in on the time clock.
How many types of LOTO are there?
The four main types are gate valves, ball valves, plug valves and butterfly valves.
What must tags have on them?
Tags shall contain a signal word and a major message. The signal word shall be either “Danger,” “Caution,” or “Biological Hazard,” “BIOHAZARD,” or the biological hazard symbol. The major message shall indicate the specific hazardous condition or the instruction to be communicated to the employee.
Who keeps the key for lock out/tag out?
the authorized employee
As such, keys and padlocks must be under the exclusive control of the authorized employee to ensure that the safety provided by padlocks when affixed to energy isolating devices is maintained when the authorized employee is performing servicing and maintenance on machines and equipment covered by the 1910.147 standard.
How many keys should a lockout lock have?
Lockout boards Locks have one key that is kept with the installer of the lock. Once the work procedure is completed, the lock and key should be returned to the lockout station.
