How much does TimberTech lumber cost?
Table of Contents
How much does TimberTech lumber cost?
TimberTech Pro and Edge Pricing Table
| TimberTech Decking Prices | Cost/linear ft. | Cost/square ft. |
|---|---|---|
| Edge Premier | $3.10 – $3.25 | $6.85 – $7.50 |
| Pro Terrain | $3.35 – $4.05 | $8.75 – $9.35 |
| Pro Tropical | $4.90 – $5.35 | $11.15 – $12.00 |
| Pro Legacy | $5.80 – $6.35 | $12.35 – $13.50 |
What length do TimberTech boards come in?
TimberTech deck boards come in 12-foot, 16-foot, or 20-foot lengths. While it may seem tempting to go for the longest board if you have a large deck, the longest board isn’t always the best fit.
What are the different grades of Timbertech?
TimberTech EDGE™ offers two collections: Premier and Prime, with four color choices and a touch of woodgrain texture.
Do you leave a space between composite deck boards?
One of the most critical steps for properly securing composite decking in place is to make sure you have a 1/4-inch to 3/16-inch gap between the decking boards (don’t exceed 1/2 inch).
How do you price a deck job?
A low-cost deck built with basic materials costs $15 per square foot, while a high-end deck costs $35 per square foot. However, the final cost is determined by the materials used, size, level, and any additional options….Cost to Build A Deck By Size.
| Deck Size | Square Feet | Average Cost |
|---|---|---|
| 20×20 | 400 | $6,100 – $14,000 |
What are the different grades of TimberTech?
Do you need a special saw blade to cut composite decking?
Cutting composite decking is similar to cutting normal lumber; it just requires special saw blades. So when cutting composite decking, it is advisable to use saw blades that are convenient and flexible for cutting. The saw blades must also be sharp.
Do you need to seal cut ends of composite decking?
1- First, the installation of a composite deck is specific and differs from that of a conventional treated wood patio. 2- The composite board should never be cut, otherwise a cut with a precision carbide blade will be necessary and you will need to apply a treated wood sealer to the cut ends.
