How thick is EIFS stucco?
Table of Contents
How thick is EIFS stucco?
The total thickness of EIFS “Lamina” is generally 1/16” to 1/8” but can be thicker in areas of high-impact, by using high impact resistant mesh. Similar to stucco it is important to follow a proper design by a registered design professional or the EIFS manufacturer.
What is the minimum thickness of stucco?
The minimum thickness of stucco from the face of the base shall be not less than 3/4 inch at every point… Non-corrodible flashing or other expedients that will prevent penetration of moisture behind the stucco shall be used when necessary.
How thick is stucco base coat?
The basecoat for polymer based systems is usually 1/16-inch thick and finish coat thickness is typically no thicker than the maximum sand particle size in the finish coat.
Is EIFS stucco still used?
Yet today, EIFS are still around. About 100 million square feet of EIFS went on new and remodeled homes last year, rivaling any other siding material.
How thick is an EIFS wall?
The entire thickness of the EIFS system is typically, approximately 1/8″to 1/4″, plus the thickness of the insulation board, which will vary, based upon desired R-value (insulation rating).
How thin can EIFS be?
What is minimum thickness allowed with an EIF system? Generally the minimum thickness of EPS for Dryvit EIFS is 1 inch. Locally, where clearance may be an issue (window and door returns, etc.). 3/4 inch thickness is acceptable.
Can stucco be 3 thick?
Without a mesh lath in place, the foundation must be plaster or concrete of some kind. 3 layers are necessary for all but a plaster base. The thickness ranges from 3/8″ to 5/8″.
How thick should a 3 layer stucco coat be?
As its name suggests, three coat stucco is applied in three layers: 3/8-inch thick scratch coat, 3/8-inch thick brown coat, and approximate 1/8-inch thick finish coat.
How thick is a 3 coat stucco system?
approximately ⅞ in.
The third coat, the finish coat, is often pigmented for color and applied by smooth trowel, hand-textured, floated to a sand finish, or sprayed. The three-coat stucco system total thickness is approximately ⅞ in. (22 mm), and weighs 10-12 lb.
How long will EIFS last?
A. Dryvit EIFS are designed to last for the typical design life of a building. The actual longevity on any specific building will depend mainly on the building maintenance program. Some EIFS facades date back 50-60 years.
What is better EIFS or stucco?
The fiberglass layer provides more durability, even against hard blows from weather. EIFS is notably lighter than traditional stucco, however. It is 80-percent less heavy than stucco, but it has a higher R-value, coming in between 4 and 5.6, which is notably higher than the 0.20 R-value of regular stucco.
How thick is EIFS foam?
Generally the minimum thickness of EPS for Dryvit EIFS is 1 inch. Locally, where clearance may be an issue (window and door returns, etc.). 3/4 inch thickness is acceptable.
What happens if stucco is too thick?
Stucco Thickness Over Block / CMU Walls is ½ inch If the stucco is applied too thick, there is a tendency for the stucco to crack and if it’s too thin, the mortar joints between the blocks may show through the stucco; thus, the wall loses part of its aesthetic look or appeal.
What are the layers of EIFS?
The most basic EIFS (a barrier EIFS) consists of 3 layers: A layer of foam plastic insulation; a reinforced layer that is applied onto the face of the insulation with a trowel, consisting of a fiberglass reinforcing mesh embedded in a cementitous adhesive; and, a final topcoat, or finish, which is a colored, textured …
When did EIFS stop being used?
EIFS has been in use since the 1960s in North America, first on masonry buildings, but since the 1990s the majority on wood-framed buildings.
How long does EIFS last?
What is EIFS stucco?
EIFS stucco is a type of stucco wall cladding that looks like a typical stucco installation on the outside, commonly having an acrylic type of finish but is different than a hard coat stucco system when you dissect the inner layers. EIFS uses multiple layers of different products that make a complete wall system…
The building code has a minimum requirement for the thickness of Traditional Hard Coat stucco, it is 7/8 of an inch. Traditional Hard Coat stucco is the most common type of stucco cladding used in the United States, it is applied in 3 layers over metal lath:
What do the EIFS specifications cover?
These specifications cover all the ways that you can use the EIFS (Exterior insulation and finishing system) System. Most Projects use combinations of these materials and methods. To tailor the specifications to your project use those sections which apply.
When installing this EIFS (Exterior insulation and finishing system) base coat should be coated?
C. EIFS (Exterior insulation and finishing system) base coat surfaces in contact with sealant shall be coated with Primer. Sealant shall not be applied directly to finishes or base coat. D. When installing this EIFS (Exterior insulation and finishing system) under ICC.
