How to check fault in XSCF?

How to check fault in XSCF?

Using the fmdump (8) Command to Confirm a Fault Perform the fmdump (8) command on the XSCF Shell and reference the log.

How to check XSCF version?

You can confirm the individual versions of the XSCF firmware and CMU firmware in XCP by using the -c xcp -v option with the version command.

What is Xscfu?

The eXtended System Control Facility Unit (XSCFU) is a service processor that operates and administrates both midrange servers. The XSCFU diagnoses and starts the entire server, configures domains, offers dynamic reconfiguration, as well as detects and notifies various failures.

How do I reset my Xscf password?

Forgot the Login Password for XSCF

1. Ask a system administrator who has the platadm or useradm user privilege to reset your password using the password (8) command.
2. If a system administrator forgets the login password, log in using the “default” account. Then use the password (8) command to register again.

How do I change the boot path in OK prompt?

Change the Default Boot Device (ok Prompt)

1. Get to the ok prompt. See Accessing the ok Prompt.
2. Configure the boot-device parameter with the correct boot device. ok setenv boot-device boot-device. where boot-device is a valid device from which to boot.
3. Verify the change. ok printenv boot-device.
4. Reset the host. ok reset-all.

What is OBP Solaris?

The Open Boot PROM(OBP) aliases in solaris SPARC environments are created to simplify the access to hardware devices using user friendly names. They can be used in place of the full OBP hardware path at the “ok” prompt.

What is ilom snapshot?

Caution – The purpose of the Oracle ILOM Service Snapshot utility is to collect data for use by Oracle Services personnel to diagnose system problems. Customers should not run this utility unless requested to do so by Oracle Services.

How do I start LDOM from OK prompt?

Perform this task to connect to an LDoms guest at the ok prompt.

1. Specify that the boot sequence should stop at the ok prompt. From the host for an LDoms guest, type: /opt/SUNWldm/bin/ldm set-variable auto-boot\?=false guest x.
2. Reboot the Oracle Solaris OS using one of the following commands. # shutdown -g0 -i6 -y.

How do I use ilom snapshot?

How to Create a Snapshot With the Oracle ILOM Web Interface

1. Log in to the Oracle ILOM web interface.
2. Select Snapshot from the Maintenance tab.
3. Select the data set you want: Normal, FRU ID, Full, or Custom.
4. Select the Enabled check box if you want to collect only log files from the data set.

What is ilom in Exadata?

Oracle’s Integrated Lights Out Manager (ILOM) provides advanced service processor hardware and software that you can use to manage and monitor your Oracle Sun servers.

What is ilom used for?

ILOM enables you to actively manage and monitor the server independently of the operating system state, providing you with a reliable Lights Out Management (LOM) system. With ILOM, you can proactively: Learn about hardware errors and faults as they occur. Remotely control the power state of your server.