What is C360 brass?

What is C360 brass?

C36000 Brass is commonly known as “Free Cutting” or “Free Machining” Brass. With a machinability rating of 100 this material is the standard by which all other metals are measured by. The 2 phase structure of C360 tends to form broken chips instead of continous coils, which interfere with high speed machining.

What is ASTM B16 C36000?

ASTM B16 Applications C36000 free-cutting brass also has superior characteristics for soldering and brazing. This type of brass alloy is used for valve parts, faucet components, fasteners, plumbing fittings, and more.

What is the difference between 260 brass and 360 brass?

Compare 360 vs 260 Brass – Difference Between 260 and 360 Brass. 1. Chemical composition. Brass 260 is composed of 68.5 – 71.5% copper, 28.5 – 31.5% zinc, 0.07% max lead, 0.05% max iron, the content of copper is higher than 360 copper, and the content of zinc and lead are lower than 360.

What is ASTM B16?

Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines. 1.1 This specification establishes the requirements for free-cutting brass rod, bar, wire, and shapes of any specified cross section produced from Copper Alloy UNS No.

What is 360 brass made of?

C36000 (“Alloy 360” or “360 Brass”), is a standard alloy consisting of copper and zinc which contains about three percent lead. Smaller amounts of lead gives 360 Brass a very desirable level of machinability. The 60-40 mixture of Copper and Zinc forms an alloy with good strength and corrosion resistance.

What is UNS C36000?

UNS C36000 free-cutting brass has a copper content of not less than 60%. The following table shows the mechanical properties of UNS C36000 rods as a function of heat treatment and thickness. Temper. Thickness. Tensile Str.

What is 260 brass used for?

Typical uses for 260 Brass include: Appliance Parts. Ammunition Components. Decorative furniture parts.

Can 260 brass be soldered?

It has high workability, meaning it’s ideal for many fabrication processes like cutting, bending, forming, and machining. It’s not recommended to weld 260 brass, but in certain conditions, you can solder or braze it.

How can you tell the quality of brass?

You can tell the difference with the help of a magnet. If you hold a magnet against the item and feel a pull, you know the piece is brass plated. If there’s no attraction, then the piece is solid brass.

What is brass alloy 260?

260 brass—also referred to as cartridge brass, yellow brass, and 70/30 brass—is a copper-zinc alloy with a distinct shiny, yellow appearance.

How strong is 360 brass?

360 brass also has an ultimate tensile strength of up to 68,000 psi and a yield tensile strength of up to 45,000 psi, enabling the material to maintain its structural integrity even when used in high-stress applications.

Is 319 brass chemical composition?

Item: Free cutting Extruded half hard Brass rods as per IS 319/ASTM455 Grade I., as per the following dimensions and specifications. Chemical composition (Cu- 56 – 59%. Lead – 2 – 3.5 %, Fe<0.35% and Zn – reminder), strength, and fabrication properties should be as per IS319 grade I.