What is G13 base type?
Table of Contents
What is G13 base type?
Fluorescent G13 tube base types are a two pin fitting located at each of the tube with 13mm between the two pins. The T8 (26mm diameter) and T12 (38mm diameter) uses the G13 cap fitting. G13 tube fittings are commonly used in kitchens, garages, and office buildings.
Is G13 same as T8?
A T8 tube is also called a TL-D tube from Philips and a Lumilux tube from Osram. You can recognize a T8 tube from it’s 28mm diameter. The socket is called G13 this because the 2 pins are 13mm apart from each other. . A T8 tube can work on an electronical ballast using a fixture without a starter.
What is the difference between G5 and G13?
G5 / G13 / 2GX13 Socket These sockets are used for fluorescent tubes. A G5 fitting for example, is made for T5 tubes, which have 5mm distance between their pins. G13 sockets have a distance of 25mm and are used to connect T8 fluorescent tubes.
What do the numbers and letters mean on fluorescent bulbs?
Lamps are typically identified by a code such as FxxTy, where F is for fluorescent, the first number (xx) indicates either the power in watts or length in inches, the T indicates that the shape of the bulb is tubular, and the last number (y) is the diameter in eighths of an inch (sometimes in millimeters, rounded-up to …
What are the 2 classifications of fluorescent lamps?
3 Types of Fluorescent Light Bulbs
- T12 bulbs are the oldest type still in use in some fluorescent fixtures.
- T8 bulbs are more expensive than T12 bulbs but will start much faster.
- T5 bulbs are a smaller version of their big brothers.
How do you read the numbers on a fluorescent light bulb?
Do LED tube lights need a ballast?
No LED bulbs require a ballast, although some are engineered to work with an existing ballast. You will find ballast-compatible or “plug-and-play” LEDs that are designed to replace linear fluorescents, compact fluorescents, or HIDs. Incandescent and halogen lamps do not require a ballast.
