What is the output stage of a 741 op amp?
Table of Contents
What is the output stage of a 741 op amp?
The output stage of the 741 consists of transistors Q14, Q18, Q19, Q20, and Q23. The input to the final stage is at Q23, which is configured as an emitter- Page 5 follower amplifier to minimize the loading effect of the output stage on the intermediate stage.
What is the 2 pin of 741 op amp?
In an 741 op amp IC pin2 is the input pin and pin6 is the output pin. When the voltage is applied through the pin2 then the output comes from the output pin 6. If the polarity is positive at the input pin2, then the polarity which comes from the output pin6 is negative. So the output is always reverse to the input.
What are the advantages of two stage op amp?
The advantages of two stage op-amp have good gain, high output swing, low noise and good bandwidth over folded cascode. And it needs compensation, low PSRR value compared to folded cascode.
What is meant by Miller effect?
In electronics, the Miller effect accounts for the increase in the equivalent input capacitance of an inverting voltage amplifier due to amplification of the effect of capacitance between the input and output terminals.
Which is output terminal of IC 741?
Pin 6 is output terminal. IC 741 mainly performs mathematical operations like addition, subtraction, division, multiplication, integration, differentiation etc. IC 741 has three stages such as differential input, gain, and push-pull output. Pin 1 and 5 are “offset null” or “balance” terminals.
Why do we use Miller capacitance?
This effect protects the capacitance of the equivalent circuit. At higher frequencies, the circuit gain can be controlled or reduced by the miller capacitance because handling the inverting voltage amplifier at such frequencies is a complex process.
What is Miller compensation?
What Is Miller Compensation? Miller compensation is a technique for stabilizing op-amps by means of a capacitance Cƒ connected in negative-feedback fashion across one of the internal gain stages, typically the second stage.
What technique is used in Millers Theorem?
1. What technique is used in Millers Theorem? Explanation: In Millers Theorem, we use the equivalent two – port network of the given electrical circuit. We divide the circuit into two parts, each part representing a different port for easier analysis of the circuit.
What is Miller effect in CE amplifier?
What is the maximum working voltage of the 741?
Supply-voltage operating range for the 741 is +4.5 volts (minimum) to +18 volts (maximum), and it is specified for operation between +5 and +15 Vdc. The device will operate essentially the same over this range of voltages without change in timing period.
