What spreader setting for Scotts Weed and Feed?
Table of Contents
What spreader setting for Scotts Weed and Feed?
Wait at least 30 days between applications.
- Spreader Settings. Scotts® Broadcast & Rotary Spreaders | Setting 3.5.
- Weeds. Kills dandelions, clover, and other major lawn weeds.
- Our Environment. Well-fed lawns are more efficient at using available water.
- Guarantee.
- Fertilizer Analysis.
- Coverage area.
What setting do I put my fertilizer spreader on?
Place your spreader setting on a low setting (usually one-fourth of the spreader setting range or less). Spread the material over a 50 x 20-foot area (1,000 square feet). If there is material left over, increase your setting. If you come up short, decrease your setting.
What setting should I use on Scotts spreader for grass seed?
When using a Scotts rotary spreader, a setting of 6 1/4 is recommended for overseeding. Use the same setting for new lawns or on bare spot repairs; however, Scotts recommends going over the area twice. With a Scotts drop spreader, use a setting of 9 1/2 when overseeding and 15 for new lawns or to patch bare spots.
How do you use Scotts Bonus S weed and Feed?
Use a Scotts® broadcast/rotary spreader or a Scotts® drop spreader to apply this lawn fertilizer and weed killer to Southern grasses. With a broadcast/rotary spreader, line up each pass across the yard approximately 5′ from the previous pass in order to ensure some overlap.
What do the settings on a Scotts spreader mean?
A spreader setting is the rate in which you apply product to your lawn. Each Jonathan Green product has recommended rates of application and coverage based on bag size. The application rate is defined as the amount of material applied per unit area of land.
How long does it take for Scotts Weed and Feed to work?
How long does Scott’s Weed and Feed take to work? If you choose the appropriate product based on your week and grass type, it can take between four days to one month to notice full results, especially if you apply it in the growing season. However, the fertilizer components will start to start between one to five days.
Are Scotts spreader settings lbs per 1000 sq ft?
per 5000 sq. ft. or 8 lbs per 1000 sq ft.
What are the numbers on Scotts Turf Builder?
Turfbuilder with Weed & Feed or Insect Control Scotts Weed & Feed contains 1.82 percent 2,4-D and mecoprop, commonly known as MCPP, to kill a variety of weeds including dandelions. The fertilizer analysis is 28-0-3 or 28 percent nitrogen, no phosphorous, and 3 percent potassium.
What do Scotts spreader settings mean?
Should I mow before Scotts Weed and Feed?
It is recommended not to mow within 2 days before or after application of Scotts Turf Builder Weed and Feed 3.
