When should I replace my rasp bars?
Table of Contents
When should I replace my rasp bars?
When the profile on a rasp bar is below 6 mm in the maximum position, you really should replace it. Only a proper tooth profile ensures optimal threshing performance, especially when handling heavy threshing loads.
What do rasp bars do?
They bring in crop and facilitate moving crop through the threshing concaves and separator grates but they do nothing in aiding in the threshing of the crop. Our Thrash Master rotor rasp bars are more aggressive and our propriety design provides for more effective threshing with less grain damage.
How many horsepower is a 9500 John Deere combine?
The John Deere 9500 model is equipped with a six-cylinder diesel engine that is turbo charged and capable of 190 horsepower.
How wide is a JD 9500 combine?
with 30.5 tires, width is 15 ft. to outside ladder. These are according to the owners manual, hope this helps. Length is 31 ft. 11 in.
What are rasp bars on a combine?
Spiked Rasp Bar– used as a primary threshing element with the additional functionality of aggressive combing of the crop mat while traveling through the rotor. This moves tough or green-stemmed crop through the combine. It will constantly comb the crop to prevent the crop from roping.
What is an AFX rotor?
An AFX rotor is essentially a specialty with a spiral nose replacing the two large impeller blades (“elephant ears”).
How much does a John Deere 9600 combine weigh?
right around 25000lbs. depending on what tires you have according to the op manuals I have.
What is a specialty rotor?
A specialty rotor has a bunch of smaller rasp bars staggered across the entire length of the rotor. An AFX rotor is essentially a specialty with a spiral nose replacing the two large impeller blades (“elephant ears”).
How many horsepower is a John Deere 9600 combine?
Powerful John Deere JD18X engine
| Model | Rated power | Power growth at lower rpm |
|---|---|---|
| 9500 | 700 PS (515 kW, 690.4 hp) | 9,3 percent |
| 9600 | 750 PS (552 kW, 740.2 hp) | 4,9 percent |
How much horsepower does a 9600 combine have?
During this short span of time, the John Deere 9000 Series Combines’ horsepower increased dramatically across all models, with the 9400 increasing from 155 to 185 hp, and the 9600 increasing from 200 to 260 hp.
How many bushels does a 9600 combine hold?
My 9600 will hold 200 bushels of clean beans plus the 2% or so dirt, pods etc.
