Which Whitfield pellet stove do I have?
Table of Contents
Which Whitfield pellet stove do I have?
The best way is to refer the stove safety label found inside the hopper lid or sometimes on the back of the stove. The serial number is proceeded by “WH-“. Locate the date of manufacture which is also notated on the safety label for accurate identification.
How do you use a Whitfield pellet stove?
Place a recommended fire starter (see your dealer for appropriate fire starter in your area) in the burn grate and put a handful of pellets on top of the starter. DO NOT USE FLAMMABLE LIQUIDS TO START YOUR STOVE. 2. Light the fire starter in the grate with a match and close the door.
Why does my Whitfield pellet stove keep shutting off?
The “LOW LIMIT SWITCH” is the white ceramic disk by the exhaust fan. It is timed by the computer that if after 30 minutes, the stove exhaust fan will simply turn off and the stove will shut down if that switch does not feel the exhaust is above 120 degrees.
Are Whitfield pellet stoves any good?
The Whitfield Cascade® free-standing stove packs a lot of performance into an affordable, high-efficiency model. This impressive workhorse features a large fuel capacity and combustion to ensure clean, long burning times for uninterrupted warmth.
Can you get parts for a Whitfield pellet stove?
Welcome to our Whitfield replacement parts section! We currently have access to all available Whitfield pellet stove parts. From the popular 1 RPM Whitfield Auger Motors and Advantage Firebrick, to door gasket and glass, we have the parts to get your Whitfield pellet stove back up and running.
How do I prime my pellet stove?
TRY- Before starting, put a small handful of pellets in the fire-pot. Add pellets to your stoves hopper and then turn on your stove. By the time the pellets burn up in your fire-pot your auger should be primed and your stove should start to drop pellets in the fire-pot with a seamless transition.
How do you calibrate a Whitfield pellet stove?
down door at the bottom of the control panel is a button labeled “Calibration.” Pressing the Calibration button enters the controller into “Calibration Mode,” where ad- justments of up to +/- 20% (increments of 5%) can be made to the fuel feed and the combustion blower.
Why does my pellet stove shut off after 30 minutes?
A pellet stove that keeps shutting off is a sign that the stove requires cleaning, as either the fuel or the air is being blocked from getting the fire. The combustion chamber and hopper should be cleaned thoroughly. A pellet stove shutting off may also signal that a part is worn and needs replacing.
How heavy is a Whitfield pellet stove?
Technical Details
| Manufacturer | Whitfield |
|---|---|
| Item Weight | 4 pounds |
| Package Dimensions | 15 x 12 x 4 inches |
| Item model number | 12146500 |
| Is Discontinued By Manufacturer | No |
Who makes Whitfield pellet stove?
Lennox Hearth Products, The current manufacturers of the Whitfield pellet stove and a division of Lennox Industries, was formed in 1996 and took over Pyro Industries in 1998. Country Collection, which used to be Country Stoves, acquired by Lennox Hearth products in 2006.
What do you do when your pellet stove won’t ignite?
Clean all vents, check and repair/replace all gaskets, adjust damper or airflow setting. Adjust air-to-pellet ratio by increasing air flow. Adjust air-to-pellet ratio by increasing air flow and/or decreasing feed rate. Adjust air-to-pellet ratio by increasing air flow and/or increasing feed rate.
Can you open a pellet stove while its running?
Pellet stoves still use a real fire inside the combustion chamber to produce heat and so can pellet stoves be left unattended even through the whole heating process can be automated? In the majority of circumstances it can be fine to leave a pellet stove operating unattended.
Can you turn a pellet stove on and off?
Can You Turn A Pellet Stove On And Off? Pellet stoves are electrical and highly automated heating appliances allowing them to be turned on and off at the touch of a button with minimal manual input required.
Does a pellet stove have a reset button?
The Pellet Stove Reset Button Many pellet stoves do not have a pellet stove reset button. Instead, you can reset them by letting the pellets run out. This way, you don’t have to try to move pellets out of the stove when you are not sure if it is hot.
