Why is my washing machine door not locking?
Table of Contents
Why is my washing machine door not locking?
The door lock could be defective or worn out, so it no longer keeps the washer door closed. Most lock assemblies are made of plastic, so if it’s defective, you won’t be able to repair it, and instead have to replace it. The door lock motor and switch assembly can also be defective, either mechanically or electrically.
How do you reset a Indesit washing machine?
How To Reset Indesit Washing Machine
- Switch off the power and unplug the machine.
- Turn on the machine using the on/off button.
- Set the timer control to the zero position.
- Plug the machine back in.
- Switch on the power.
- The display lights should now be flashing.
- Turn off the machine with the on/off button.
Is there a reset button on Indesit washing machine?
Try to unplug the washer from the outlet for 2-3 minutes, then right after press and hold the start button for 3 seconds. This should reset the controls and allow you to put the washer into a drain/spin cycle.
Why is the lock light flashing on my washing machine?
The Lid Lock Light will flash if Lid Lock has not moved into the Lock Position, the Lock Motor can not be powered, or the Lid is not closed completely due to interference. Some models will lock immediately, while others will not lock until after the wash cycle has started.
How does a washer door lock work?
When the door is closed, a connection inside the lock powers an electrical coil wrapped round the bi metal part. This heats up the metal, which then bends. This bending operates the lock and then makes another electrical connection passing power to the rest of the machine.
How do you reset a washing machine door?
If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.
