Are AquaCal heat pumps any good?

Are AquaCal heat pumps any good?

Horrible Design and Horrible Manufacturer. I have had nothing but issues with this company, AquaCal. We had a new pool installed and bought this heat pump from them. It does not heat the water more than 3 degrees at any time.

How long do AquaCal pool heaters last?

With proper installation and maintenance, a heat pump will generally have a lifespan of about ten years, though many have lasted longer. We at AquaCal have seen some last as long as 15 years!

How do I reset my AquaCal heat pump?

Simultaneously Press “Pool / Spa” button and “Up” button until the display shows 888. Release buttons. Reset is complete.

Who owns AquaCal heat pump?

Since 1981, as an employee and part owner of AquaCal ®, Jeff, with his experience and training in the HVAC industry, has been one of the pioneers of the pool heat pump industry. With the acquisition of AquaCal ® by Team Horner ® in 1992, Jeff was appointed Vice President, AquaCal ®.

Should I leave my pool heat pump on all the time?

A pool heat pump should not be left running all the time. For one, you are wasting electricity by keeping it on when your pool is already warm enough. Also, this will lead to an increase in energy costs month after month.

How many hours a day should a heat pump run?

Typically, a heat pump should cycle two to three times an hour. The heat pump should stay on for 10 to 20 minutes during the cycle. However, during cold outside temperatures (below 30-40 degrees), a heat pump will constantly run to maintain the home temperature.

How do I adjust the temperature on my Aquacal pool heater?

Select the pool or spa thermostat. Then press the up or down arrow to set the desired temperature (setpoint) for the water. The heating indicator will illuminate when heating the water. The cooling indicator will illuminate when cooling the water.

Why is my heat pump fan not turning?

If the compressor is running but the fan is not, the cause is either a bad fan motor or a burned out capacitor. But first, check for debris! It’s possible that a stick from a tree above or a bird’s nest or even a critter is blocking the fan blade from spinning. It happens.

Where are AquaCal heat pumps manufactured?

AquaCal is located in St Petersburg, Florida. We are proud to produce an American-made product, and to support the local community through job creation. While Florida is not typically recognized as a strong state for manufacturing, most people would be surprised at the level of manufacturing that actually exists here.

How long does a heat pump take to warm a pool?

24 to 72 hours
It depends on a few things to determine how long it takes a heat pump to heat a pool. However, overall a heat pump generally heats a pool after 24 to 72 hours by 20-degrees Fahrenheit. For smaller pools like a spa pool, the heat pump can heat a pool between 45 and 60 minutes.

What temperature do pool heat pumps work best?

Heat Pumps are designed to raise the temperature of a pool up to the ideal swimming range, between 78 – 82 degrees Fahrenheit,. Because they work by taking in air that is already warm, they work best in humid areas where the ambient temperature stays above 60 degrees Fahrenheit.