Can I install Windows 10 in HP G62 laptop?
Table of Contents
Can I install Windows 10 in HP G62 laptop?
While apparently not supported, I was still able to upgrade to Windows 10 (64-bit).
How disassemble HP G62?
- Step 1 HP G62-453 disassembly for cleaning and thermal paste.
- Disconnect the wifi antennas and remove the wifi adapter.
- Now remove the HDD and the RAM.
- Remove the screws for the keyboard.
- Remove the 3 screws of the DVD/RW bay.
- This is the step where we will remove the screws from the whole case.
What generation is HP G62?
Core i3 1st Gen
HP Pavilion G62-455TX Laptop (Core i3 1st Gen/3 GB/320 GB/Windows 7/1)
How much RAM does a HP G62 laptop have?
The specs at the link below state the max for the G62-450SA is only 4 GB, but the processor and chipset in your model should be able to support 8 GB of memory as long as you have a 64 bit OS installed.
Can I reinstall Windows 10 without a disk?
If you want to reinstall Windows 10 without CD drive, you can use USB drive. You can choose to create a recovery drive using built-in tool. But if you want to reset your PC, you should tick back up system files to the recovery drive option. And the USB drive must be at least 16GB in size.
How do I reinstall Windows 10 on a new hard drive?
Clean install windows 10 on new hdd
- Disable Secure Boot.
- Enable Legacy Boot.
- If Available enable CSM.
- If Required enable USB Boot.
- Move the device with the bootable disc to the top of the boot order.
- Save BIOS changes, restart your System and it should boot from the Installation Media.
How do I reinstall operating system after replacing hard drive?
To reinstall your Windows OS on your new computer, create a recovery disc that the computer can use to boot up the new, blank drive after it’s installed. You can create one by visiting the Windows website for your particular operating system version and downloading it to a CD-ROM or USB device.
How do I install Windows 10 after replacing hard drive without disk?
To install Windows 10 after replacing the hard drive without disk, you can do it by using Windows Media Creation Tool. First, download the Windows 10 Media Creation Tool, then create Windows 10 installation media using a USB flash drive. Last, install Windows 10 to a new hard drive with USB.
How do I install an operating system on a new hard drive?
How to Replace a Hard Drive and Reinstall an Operating System
- Back up data.
- Create a recovery disc.
- Remove the old drive.
- Place the new drive.
- Reinstall the operating system.
- Reinstall your programs and files.
Why is my hard drive not detected in BIOS?
The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. Be sure to check your SATA cables are tightly connected to the SATA port connection.