How do I fix my DStv error E48-32?

How do I fix my DStv error E48-32?

DStv No Signal Problem (E48-32 Error) – How to fix step by step

1. Why your DStv says no signal?
2. Step 1: Check your DStv connection cables.
3. Step 2: Reboot your decoder.
4. Step 3: Inspect your DStv satellite dish.
5. Step 4: Check your LNB.
6. Step 5: Call the approved DStv installer.

How do I fix my DStv E48 error?

There is not much you can do to solve a no signal or searching for signal error (E48-32) when it is caused by rain. The best resolve is to have your dish aligned to optimize the DStv reception. Furthermore you could upgrade your DStv installation by installing a bigger dish.

What does E48-32 means on DStv?

Dstv E48-32 means There is no signal or connection from the satellite dish. This will bring faults like : Missing out some channels, Freezing or squeaking picture, black screen with audio but no video these are the signs of a dstv e48-32 error.

How do I fix Gotv E48-32 searching for signal?

How to Clear Error Code on GOTV – E48-32 Error Message

1. Check if antenna is properly connected to decoder, if it isn’t, connect properly.
2. Tap on the OK button to see signal information.
3. Go to Menu>Advanced>Installation – click on Auto scan.

How do I get DStv signal on my phone?

Search for the Satellite Director application on Android and iOS and install it into your device. Once installed, you will have to allow it to access your location to detect it using GPS and place it on the map more accurately.

How do I restore my DStv signal?

How To Fix Signal Strength On DStv?

1. Check F-type connectors. Check for incorrectly connected F-type connectors on the LNB and at the back of the decoder.
2. Correct the LNB alignment.
3. Adjust satellite dish alignment.
4. Replace a faulty LNB.
5. Move your satellite dish.
6. Cut down or prune trees that may obstruct the signal.

How can I fix my DStv signal?

What causes E48 32 on GOTV?

Whenever you see an E48-32 error on your Gotv, it means that your signal strength is low or your Gotv does not receive any antenna from your antenna. When your Gotv antenna cable breaks, the signal will cut off, and you will see an e48-32 error on your screen.

How do I manually get DStv signal?

How do I resolve no signal on GOtv?

To fix Gotv no signal, follow these simple steps:

1. Connect your Gotv decoder power source and switch it on.
2. Wait for it to finish booting.
3. When no signal pops up, press on “Help” button on the remote to display the “Menu.”
4. Scroll to “Advanced options” and press ok.
5. Select “Signal information” and press ok.

What is error E48 32 on GOtv?

What is the meaning of E48 on GOtv?

Whenever you see an E48-32 error on your Gotv, it means that your signal strength is low or your Gotv does not receive any antenna from your antenna.

What causes E48 32 on GOtv?

Here i will share with you how to solve Gotv E48-32(searching for signal Error Message). This is a very common problem with many Gotv Decoders, has this is caused by maybe a change in the position of the antenna but it does occur sometime even when the antenna is in Good Shape.