How do you remove child lock on AEG lavamat washing machine?
Table of Contents
How do you remove child lock on AEG lavamat washing machine?
When the child lock is engaged it will stop you from performing any action. To deactivate this option, press and hold the Stains/Prewash (10) and the Extra Rinse (7) buttons for 5 seconds until the padlock no longer displays on the LED display.
How do you open a locked AEG washing machine door?
Reset the machine. Switch off the mains plug socket and then switch it on again after about 20-30 seconds. Then test whether the machine is working normally, this should also reset the door lock icon. If this hasn’t worked then we recommend an engineer visit.
How do you turn off child lock on AEG 6000 washing machine?
A padlock icon is displayed on an AEG washing machine to show that the child lock function has been activated, and the machine won’t function. To deactivate it push the Stains/Prewash and the Extra Rinse buttons simultaneously until the padlock item disappears from the LED display.
How do you unlock child lock on Panasonic washing machine?
In order to activate the Child Lock , press and hold the Drying Level button (the `lock` symbol appears on the display). In order to deactivate the Child lock press and hold the Drying Level button (the `lock` symbol disappears from the display).
Why is there a lock symbol on my washing machine?
A padlock being displayed is to highlight that the ”Child lock” function has been activated. 2. When the child lock is engaged it will stop you from performing any action apart from turning the appliance on or off via button/control dial. Usually, the child lock buttons will be highlighted on the control panel.
Do washing machines have a child lock?
Look for the childlock symbol which is a padlock. This will be linked to either one or two buttons together on your machine dependant on your model. Press and hold the relevant childlock button(s) for three seconds to activate the childlock function. While childlock is activated, all buttons will be disabled.
How do I reset my AEG Protex?
With the switch in the off position, hold in the Pre wash & soak button and then turn the rotary knob to gentle (or short) spin. Presumably this should run a short test sequence and clear the error.
Why is my locker lock not opening?
Most people never think of a lock is something that needs to be cleaned, but dirt can stop your locker from opening. The best lubricant to use is powdered graphite. Put some graphite in the lock’s opening, then put your key in. Turn the key a few times to work in the lubricant and see if it allows you to open the door.
How do I turn off child lock?
- You can activate the CHILD LOCK function by pressing the STOP button for more than 5 seconds. The key symbol will light up in the front panel display.
- To cancel, press the STOP button for more than 5 seconds so that the key symbol disappears from the front panel display.
Why is my washer stuck on lid lock?
– Lock striker that presses down on the lid switch may be out of alignment. – A piece of lint or washing machine detergent has built up over time and hinders the locking of the lid. – The control board sees an open lid switch when it attempts to lock.
