How long do reagent strips need to be dipped for?

How long do reagent strips need to be dipped for?

Usually the instructions supplied with the urinalysis test strip product will suggest dipping the entire dipstick into the urine sample for 1 or 2 seconds and then comparing the results.

What is the proper storage and handling for Multistix 10 SG?

Multistix® 10SG urine dipsticks are stable until the manufacturer’s expiration date printed on the bottle when stored properly. 2. Urine dipsticks are stored in the original, tightly sealed bottle at room temperature (15-30oC or 59-86oF). 3 Do not store dipsticks in direct sunlight.

How long should reagent strips remain immersed in the specimen sample?

Collect urine in a clean container and test as soon as possible. If testing cannot be performed within one hour, refrigerate the specimen immediately. Allow refrigerated specimen to return to room temperature before testing.

Why is it important to immediately replace the lid on the urine test strips container?

Answer and Explanation: It is important to immediately replace the lid on the urine test strips container because the strips must be protected from light, volatile chemicals,… See full answer below.

How do you use reagent strips?

Immerse the reagent area of the strip in the urine specimen and take it up quickly and immediately 3. Run the edge of the strip against the rim of the container to remove the excess urine 4. Hold the strip up horizontally and compare the result on the strip with the colour chart on the bottle label closely.

How do you take care of reagent strips?

The strips should be stored in a dry place at a temperature between 2° c -30° c’. Don’t store the strips in a refrigerator and keep them away from direct sunlight. Do not touch the reagent area of the strip.

How long should you wait before reading the results of the urine testing strip?

The test can often be read in as little as 60 to 120 seconds after dipping, although certain tests require longer. Routine testing of the urine with multiparameter strips is the first step in the diagnosis of a wide range of diseases.

What are the six precautions for using a reagent strip?

Reagent Strip Precautions

• Store strips according to the manufacturer’s recommendation.
• DO NOT expose strips to moisture, volatile fumes, or direct sunlight (emphasized in the image on the right).
• Avoid contamination of test strips.
• DO NOT use discolored strips.
• Check the expiration date.

When using a reagent strip for urine testing the correct technique is to?

Use a fresh, well-mixed, uncentrifuged urine. Hold the reagent strip by the opposite end from the test areas and dip the stick into the specimen so that all test areas are immersed in the specimen. Remove the stick immediately. Prolonged immersion in the sample may wash out the test reagents.

How do you use urine reagent strips?

How do you test urine with a reagent strip?