How much does it cost to service motorcycle forks?

How much does it cost to service motorcycle forks?

Forks*

Are fork seals hard to do?

Replacing your fork seals is an easy enough job if you know a few tricks. The first step to any DIY job is to do a little research and get all the parts you’ll need for the job. You’ll at least need the new seals and fork oil but should also consider wipers, bushings and any seals or o-rings for the caps.

Can I ride with no fork oil?

With low or no oil in one of your fork tubes, the spring on just one side may absorb next to nothing. On the other hand, your bike might absorb too much. The result can be an extremely bouncy ride, feeling every single bump on the trail, and even injuring yourself when coming down from a jump.

How long should fork seals last?

Replace Fork Seals Fork seals should be replaced after 40 hours of riding or two years if you don’t ride very often. Even if you regularly clean the seals, they wear out eventually and leak no matter what you do to keep a tight seal.

Are fork seals hard to replace?

Can you ride with a blown fork seal?

You should notride with a bad fork seal for many reasons, safety being number one. A bad fork seal could leak oil onto your brake calipers, resulting in trouble decelerating and stopping the bike. That, plus poor shock absorption and an unbalanced ride makes a leaky fork seal dangerous to ride on.

What tools do I need to change fork seals?

Be sure you have the proper tools and a clean work space before you begin. Specialty suspension tools are readily available online.

1. 47mm ProX fork seal kit.
2. Torque wrench (recommended from a reputable company for accuracy)
3. Socket wrench (3/8 drive)
4. 8mm socket or 8mm T-handle wrench.
5. 10mm socket or 10mm T-handle wrench.